How To Use A Master Lock Combination?

Contents

How do you unlock a Master combination lock?

Opening a Combination Lock

  1. Turn the dial to the right at least three times.
  2. Stop on the first number in the combination.
  3. Turn the dial to the left a full rotation so you go past the first number, in this case, 2, and stop on the second number in the combination.

How do you use a Master Lock key code?

To set your own combination:

  1. OPEN lock and TURN shackle 90° to position I.
  2. PUSH shackle in to lock until it “clicks.”
  3. TURN shackle another 90° to position II.
  4. SET dials at black indicator line to desired combination.
  5. PULL shackle UP. VERIFY dials remained set to your combination before locking.

Can a Master combination lock be reset?

Resettable combination locks have a combination that is assigned by the owner of the lock. Therefore, Master Lock does not have record of the combination that the owner set. The lock cannot be reset unless it is in the open position. If your lock is attached to something, you will need to call a locksmith for removal.

How many combinations does a Master Lock have?

Introduction: How to Crack a Masterlock Padlock Combination in 100 Tries or Less! FACT: most masterlock padlocks have around 64,000 possible combinations. ANOTHER FACT: this instructable ( if done properly) will turn 64,000 into 100. so go to step 1 and let’s get started.

How many times do you turn a combination lock?

Start by spinning the dial three or four times clockwise to clear it, then stop on the first number of the combination. Turn the dial counterclockwise one full turn, passing the first number, then stop on the second number of the combination.

Do Master locks have the same key?

In a Master Keyed system, a master key opens all the locks in the system although each lock also has its own unique key.MK in the product number designates that the products will be Master Keyed.

Can I order master lock by key number?

It may be possible to get replacement keys for your Master Lock padlock. You will need to know your key number. The key number is stamped on the original keys. If you know the key number, a Master Lock distributor can order a duplicate cut key direct from Master Lock.

Can a master key open any lock?

When lock rekeying into a master key system, two keys are created:It cannot be used inside any other locks you have. Master key: The master key can open all locks you have in your residential or commercial property.

How do you reset a master lock if you forgot the code?

Resetting your Combination Lock

  1. Open the lock using the previous combination.
  2. Insert the reset tool in the hole on the side of the lock.
  3. Push the reset tool in and turn 90° in either direction.
  4. Set wheels to your new combination.
  5. Turn and remove the reset tool.
  6. Record your combination in a safe place.

How do you open a lock box without the code?

How to Open a Lockbox without the Code

  1. Step 1: Insert the pick to the gap located at the first number. Insert the pick inside the gap located at the first number.
  2. Step 2: Look for the loose spot in the wheel.
  3. Step 3: Repeat the process for the remaining numbers until you open the lock.

How many digits are in a Master Lock?

Note that a standard 40-digit Master Lock has 64,000 possible combinations that may open the lock. However, don’t let that discourage you. If you don’t know the serial number, then you can significantly narrow down the number of possible combinations to crack your lock (Method 1).