Pair your device with a Bluetooth accessory
- On your device, go to Settings > Bluetooth and turn on Bluetooth.
- Place your accessory in discovery mode and wait for it to appear on your device.
- To pair, tap your accessory name when it appears onscreen.
Contents
Why won’t my earbuds connect to my iPhone?
Check for debris in the headphone port on your iPhone, iPad or iPod touch. Check your headphone cable, connector, remote, and earbuds for damage, like wear or breakage.Firmly plug your headphones back in. If your iOS device has a case, remove the case to get a firm connection.
How do you pair earbuds to a device?
How to pair Bluetooth headphones with your phone
- Open the Settings app on your phone.
- Tap Connected devices.
- Tap Pair new device.
- Make sure your headphones are in pairing mode (see the owner manual on how to do this).
- Tap the headphones under the list of available devices.
How do you set up earbuds?
How to Connect Bluetooth Headphones to Android Phone
- First Open Settings.
- Next, tap Connections.
- Then tap Bluetooth.
- Then tap Scan at the top-right corner of your screen.
- Next, press and hold the power button on your headphones.
- Finally, find your headphones and tap them.
Why are my earbuds not connecting?
On Android, tap the Settings cog next to a paired device and choose Unpair (or Forget, as it’s labeled on some phones). Recharge the battery.Try plugging them in and charging them fully before pairing, even if they say they have some battery left. Make sure both devices are compatible.
Why are my earbuds not working?
Check audio settings and restart the device
There’s also a chance the problem isn’t with the jack or the headphones you’re using but has to do with the device’s audio settings. If this is the case, you’ll be able to sort it out in no time. The most obvious fix is to check if you muted your phone or put the volume down.
Why won’t my iPhone find a Bluetooth device?
You should first make sure Bluetooth is turned on and try connecting your device in the Bluetooth settings. If your iPhone still won’t connect to Bluetooth, you can try deleting other devices from Bluetooth settings, updating your iOS software, resetting your network settings, or restarting your iPhone entirely.
Why are my earphones not connecting to my phone?
Check the headphone jack and volume buttons on the phone or tablet. Use the volume up and down keys to make sure they’re working. You should also inspect the headphone jack on the phone or tablet with a flashlight and make sure there are no debris or bent pins. If the pins are bent, service is required.
How do I get my earbuds to work again?
How to Fix Earbuds That Won’t Work
- Turn on the earbuds’ power source. Some earbuds have power sources.
- Turn on the audio source or turn up the volume.
- Clean the earbuds.
- Unplug and reconnect wired earbuds.
- Check the Bluetooth connection with wireless earbuds.
- Connect the earbuds to another audio source.
How do you reset earbuds?
The typical procedure of resetting earbuds like these is 1) Place the earbuds in the charging case and leave the case lid open, and 2) Press & Hold the button on the charging case for 10+ seconds, you should then see a change on the indicator light on the charging case that indicates a successful reset.
How do I get my iPhone to recognize my headphones?
For iPhones Running iOS 11 Or Newer
Then, press and hold the audio box in the upper right-hand corner of Control Center. Next, tap the AirPlay icon and make sure there’s a check mark next to Headphones. If the check mark is next to a different device, you can switch to headphones by tapping on Headphones.
Why is my Bluetooth not picking up devices?
For Android phones, go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile & Bluetooth. For iOS and iPadOS device, you’ll have to unpair all of your devices (go to Setting > Bluetooth, select the info icon and and choose Forget This Device for each device) then restart your phone or tablet.
How do I manually locate a Bluetooth device?
Step 1: Pair a Bluetooth accessory
- Swipe down from the top of the screen.
- Touch and hold Bluetooth .
- Tap Pair new device. If you don’t find Pair new device, check under “Available devices” or tap More. Refresh.
- Tap the name of the Bluetooth device you want to pair with your device.
- Follow any on-screen instructions.
How do wireless earbuds work with iPhone?
To pair a Bluetooth wireless headset with your iPhone, start by making the headset discoverable.When your headset is discoverable, tap “Settings” on the iPhone and then tap “Bluetooth.” Toggle the iPhone’s virtual Bluetooth switch on. Tap your headset on the list of available Bluetooth devices.