Ink tags: First determine if the tag is an ink tag, which is usually white or red and circular and usually says it contains red, pink, or blue and yellow ink that may combine. If you try to remove it improperly the tag will “explode” marking the thief — or you — and the item with ink.
Contents
Method 6 of 7:
Many modern tags actually contain an electro-magnet, not an ink pouch; upon breaking it open, you will see for yourself that there’s no ink inside it. Put something between the tag and the head of the pin to give it some slack.
Ink Tags. Ink tags are geared toward preventing shoplifting instead of triggering an alarm when a theft does occur. They typically are used on clothing items that would be ruined if stained with ink.
Ink tags are a form of retail loss prevention most commonly used by clothing retailers.When the tags are forcibly removed, one or more glass vials containing permanent ink will break, causing it to spill over the clothing, effectively destroying it.
A clothing security tag is one crucial part of an EAS system. The tag is a small “signal transmitter” that you put on the merchandise that you want to protect.
You have absolutely nothing to worry about. These consumer security tags often contain a small radiofrequency (RF) transmitter or a passive system that is activated by a nearby source. They are not hazardous in any way to the consumer.
How do I know if a security tag has ink?
Ink tags: First determine if the tag is an ink tag, which is usually white or red and circular and usually says it contains red, pink, or blue and yellow ink that may combine. If you try to remove it improperly the tag will “explode” marking the thief — or you — and the item with ink.
Ink security tags provide a cost-effective way for retailers to have some type of security at their store. They are especially beneficial to retailers who cannot afford an electronic security system. However, an ink tag does not connect to an alarm; they are stand-alone security mechanisms.
How do you demagnetize a security tag?
To deactivate the magnetic security strip, all that need be done is to magnetize the strip along its length. This can be done by applying a sufficiently strong magnetic field along the length of the strip.
How do you stop a security tag from beeping?
Although it may sound too simple to be true, yes, you can stop the alarm from going off by covering the tags with a conductive material. The aluminum foil bag example in the beginning works because of a concept called ‘electromagnetic shielding’.
What happens if you pull off a security tag?
If you take the security tag off the jacket and leave the store with it, on top of being charged with removal of the device, you could also be prosecuted for theft. The charges for this offense range from a simple misdemeanor to a class “C” felony. Again, the level depends on the value of the stolen item.
But there’s an important reason security tags are filled with ink –– it can be a helpful measure for retailers and deter potential shoplifters. If an item with an ink tag is purchased at a store, the cashier will remove it with a special device called a detacher after the customer pays.
What kind of security tag has ink?
Benefit denial tags see the stolen merchandise negatively impacted when the thief tries to remove the tag. The most common form is ink dye tags which release indelible ink when the tag is tampered with, effectively rendering the stolen item useless.
Is security tag ink permanent?
Security ink is permanent, which makes it difficult to get out of clothes. According to the Iowa State County Extension Office, treat the stain immediately and blot it rather than rubbing, which will only spread the mess.
Will a strong magnet remove a security tag?
While they can be mutilated off with a pair of snips, a screwdriver and a pair of pliers, they can be removed much easier with a high powered magnet.
You can just cut through the cable with wire cutters if you do not have a magnet detacher. If you try to use regular scissors, you will absolutely destroy your scissors.
What makes items beep when stolen?
What makes the door beep is a tag on the item that sends a signal to the gate you pass through as you leave, if the tag hasn’t been deactivated when you paid for the item.
4 Main Types of Security Tags
- Benefit Denial. Image source: Pinterest.
- EAS Tags. EAS tags are the most widely used tags in retail.
- Visual Tags. Visual tags look just like the EAS tags we’ve discussed, but unlike them, these do not have a transmitter inside the casing.
- Lanyards and Labels.
Do barcodes trigger alarms?
No, it’s the magnetic security device ( unobtrusive little white plastic strip ) somewhere attached to the above averaged valued item that triggers the alarm. No, barcodes are merely how a store scans price and product information, RFID tags are what sets off alarms at door if not deactivated.
Do security tag stickers work?
Security labels
They work in the same way as hard tags in that they are in constant communication with a store’s EAS antenna, causing an alarm to sound if they pass the antenna without being deactivated.The benefit of adhesive security labels is that they offer affordability and disposability.