Restart your gateway or modem manually
- Unplug the power cord from the back of your gateway or modem.
- Wait 20 seconds.
- Put the internal battery back in, if you have one.
- Plug the power cord back in.
- Wait up to 10 minutes for the gateway or modem to restart and your Broadband light to turn solid green.
Contents
Why is my AT&T router not working?
Confirm the Power, Broadband, and Service lights on your gateway are green.If the Power, Broadband, or Service lights on your gateway are not green, Power cycle your gateway by unplugging the power cord on the unit from the wall outlet, and then wait two minutes before plugging it back in.
How do I manually reboot my router?
Option 1: Reboot manually
To manually reboot your router, unplug it (you can remove the power cord from the wall outlet OR from the power port on the back of the router). Wait one minute, and plug it back in.
Wi-Fi Protected Setup (WPS) provides a fast, easy way to connect your WPS-enabled devices to your hotspot Wi-Fi network without having to manually enter the password. To utilize the WPS features on your device, press and hold the WPS key.
What lights should be on my AT&T router?
If you have power and the Wi-Fi Gateway is turned on, the Power light on the front of your AT&T U-verse Wi-Fi Gateway will have a green light. If no lights are on:The power cord should have a green light on indicating that there is power.
Does unplugging a router reset it?
When you turn something off and back on, you reboot it, whether it’s a phone, computer or router. For a router to be successfully rebooted, it must be completely disconnected from its power source, whether it’s coming from the wall, and internal battery or both.
How do I refresh my router?
For some people the easiest way to reboot the router is to unplug the power supply, wait 30 seconds, then plug it back in again. Alternatively, there may be an on/off switch on the back of the router, in which case you can use that to turn it off, wait 30 seconds, and then turn it on again.
How do I restart my internet connection?
Here’s how to reboot a separate modem/router:
- Locate your modem and router.
- Unplug both the modem and router.
- Leave both devices unplugged for at least 30 seconds.
- Plug the power back into your modem ONLY.
- Plug in the router and wait, at minimum, two full minutes.
- Test things out.
The WPS button simplifies the connection process
Press the WPS button on your router to turn on the discovery of new devices. Then, go to your device and select the network you want to connect to. The device is automatically connected to the wireless network without entering the network password.
Should I disable WPS?
WPS is a great example of the trade-off between convenience and security.This is why we disable WPS. Once disabled, you’ll need to use the conventional password method to add additional devices to your wi-fi network (less convenient) but your router will no longer be vulnerable to a WPS attack (more secure).
Check your cables to be sure they’re secure and not damaged. Then, press and hold the red reset button for 10 seconds. Your gateway is being updated. Wait for the light to turn solid white.
Why is my AT&T router blinking yellow?
Amber: There’s a software update in progress. Don’t unplug the gateway or remove the battery until the update completes. Red: The gateway or power supply may be malfunctioning. Try rebooting your gateway to fix it.
How do I know if my AT&T modem is bad?
See if you have a bad modem
You may have a defective modem if it makes one of these sounds: A loud humming noise. A line noise or modem connection sound when plugged into the telephone jack.
Push the WPS button on the router. The button will typically begin to flash amber/orange, letting you know it is searching for a device to connect.
How do I get my internet back after resetting my router?
Unplug the router’s power supply. Press in and hold the RESET button. While holding the RESET button, plug in the power supply. When the router has power again, continue to hold the RESET button until the SYSTEM LED begins flashing.
Will resetting my router mess up my Internet?
Well, yes, if you reset your router (modem), you will temporarily lose internet connection. Once it’s back up, you can reconfigure your router modem (to your appropriate settings), then everything should be back to normal.
How often should I restart my router?
Most companies recommend rebooting your router at least every couple of months. If you’re ever wondering whether or not you could benefit from a router reboot, just go ahead and do it. There aren’t any negative results from rebooting your router, and it provides quite a few positive benefits.
What happens if I reset my router?
Router reset will wipe out all of your customized settings. Router username and password will be reset to factory default values as shown on the router label. Personalized Wi-Fi settings will be deleted, including the Wi-Fi name and password you created.
How do I reboot my modem and router?
Step 1: Unplug the modem and router from the power outlet. Step 2: Wait at least 15 seconds. Step 3: Plug the modem back into the power outlet first, wait 1-2 minutes, then it’s time to power on the router. Step 4: Wait for all panel lights on your cable modem to become green on before testing your internet connection.
When should I reset my wifi router?
A router reset will allow you to set it from scratch where it will work at optimal levels. Do this when you feel you’re having issues with your network or after you’ve upgraded your internet speed and don’t seem to get the speed that you’re supposed to get.
Should I reset modem or router?
Even if you haven’t encountered any errors it’s a good idea to periodically restart your router and cable modem (especially the router). Once per month is a good pace. This will help keep your connection working and should reduce the possibility of losing internet at an inopportune time.