A site plan or a plot plan is a type of drawing used by architects, landscape architects, urban planners, and engineers which shows existing and proposed conditions for a given area, typically a parcel of land which is to be modified.An example of a site plan is the plan for Indianapolis by Alexander Ralston in 1821.
Contents
What is meant by site plan?
A site plan is an architectural plan, landscape architecture document, and a detailed engineering drawing of proposed improvements to a given lot.Site plans are often prepared by a design consultant who must be either a licensed engineer, architect, landscape architect or land survey”.
What does a site plan drawing show?
A site plan may or may not be drawn cutting through the building.This can show the property lines, the building location, utilities, roads, landscape etc. A site plan will most typically be drawn from above the building, as if showing a roof plan of the building within the site plan.
What is the main purpose of a site plan?
The basic idea behind a site plan is to show: the shape of the site. the size of the site – shown using a scale. the orientation (i.e. which way is north)
What is the difference between a site plan and a plot plan?
A site plan, also known as a plot plan, is a diagram which is meant to show proposed improvements to your property. A site plan is important because it also includes information in regards to the landscape features of a given parcel.
What scale is a site plan?
The site plan (also known as a block plan) should be drawn at an identified standard metric scale (typically 1:100, 1:200 or 1:500). It should show the proposed development in relation to the site boundaries and other existing buildings on the site, with dimensions specified including those to the boundaries.
Is site plan same as survey?
A site plan is prepared by the architect as part of the schematic design drawings, and shows the building and its surroundings. This drawing must be prepared especially for this project. A topographic survey is prepared by a surveyor or engineer, showing the legal boundaries of the site.
Who creates a site plan?
Site plans are often prepared by a design consultant who must be either a licensed engineer, architect, landscape architect or land surveyor”.
What do site plans look like?
A site plan “usually shows a building footprint, travel-ways, parking, drainage facilities, sanitary sewer lines, water lines, trails, lighting, and landscaping and garden elements.Floor plans may also include details of fixtures like sinks, water heaters, furnaces, etc.
What are the stages of site planning?
A basic three stage site investigation scheme is put forward; stage I, which consists of “site exploration”, is preliminary; stage II, “site investigation”, is detailed; both these stages are more or less completed before construction starts; stage III, “foundation investigation”, is carried out during construction.
How are site plans measured?
To create an accurate floor plan, start by measuring a room: Measure along the baseboard the length of one wall, from one corner of the room to another. For accuracy, measure to the nearest 1/4 inch. Record this number on your rough floor plan and in your notebook.
How do I show utilities on a site plan?
Utilities. A site plan should show where access to services will be granted. This includes electricity, gas, water and sewers. In our case study house the point at which the mains water can be accessed is the blue dot, similarly for electricity (yellow dot), gas (purple dot) and sewer drain (orange dot).
What is an architectural site plan?
A site plan is an architectural document that functions as a map of a building site. It provides all the details about how the structure will be oriented on the lot.A builder or contractor will create a diagram that shows the plot of land and its property lines, along with the following: Landscape features.
Do surveyors do site plans?
Site-Planning Survey
Site-planning surveys are used to plan site improvement development. These are also necessary when applying for building permits, and the proposed improvement is drawn inside the survey boundary.
What is a site survey drawing?
A site survey is a simple 2D drawing of your space that shows all dimensions and features, such as doors, windows and columns. A good site survey provides a foundation for our experts to begin developing your new layout and design.
What is included in a site survey?
Site surveys might include: Existing buildings (including valuation, measured surveys, structural surveys, structural investigations, condition surveys, and demolition surveys). Geological and geotechnical. Topographical surveys, perhaps including laser scanning, Lidar or photogrammetry.
What kind of engineer does site plans?
A residential civil engineer can offer a spectrum of services that prepare your site for construction. These include: site planning.
What is site plan approval?
Site Plan Approval is a planning review process that examines design and technical aspects of a proposed development. Site plan drawings provide detailed information about development plans for a specific property.Site Plan Approval concludes in a site plan agreement registered on title to the property.