The Best UniFi Access Points
- AC-Lite: The old baseline.
- WiFi 6 Lite: The smallest, cheapest Wi-Fi 6 AP.
- AC-LR: LR stands for long-range.
- AC-Mesh: If you need longer-range wireless backhaul or outdoor coverage, this is a good basic option.
- BeaconHD: If Ethernet isn’t available, this is a good indoor mesh AP.
Contents
Which UniFi AP for home use?
Best overall Access Point: UniFi nanoHD $179
Ubiquiti’s best overall access point falls to its newer UniFi nanoHD. At the prosumer level, it’s the company’s most-capable option. Touting up to 1733 Mbps 5Ghz and 300 Mbps 2.4Ghz speeds, it features a 30% smaller design than the other models.
Which AP should I buy?
On an access point, try to go with at least a 2×2 radio, but 3×3 is best. This will yield the best speed and performance, even if you have a bunch of 1×1 and 2×2 clients. The more spatial streams, the better! Try to go for a 3×3 AP if you can, but 2×2 is okay.
Are UniFi AP worth it?
While an Amplifi Mesh WiFi system is just about $300-350 USD, UniFi Pro gear will cost more and you’ll need stuff to start out and it won’t always feel intuitive as you plan your system. It is worth it and I’m thrilled with the result. The flexibility and customizability its offered has been epic.
Which UniFi AP is best?
The Best UniFi Access Points
- nanoHD: This is the cheapest 802.11ac Wave 2 access point, offering 4×4 MU-MIMO and fast 5 GHz performance.
- FlexHD: The same radios and capabilities as the nanoHD in a different form factor.
- WiFi 6 LR: The long-range version of the UniFi 6 Lite.
- AC-HD: The best AP for high-density networks.
Which UniFi AP has the best range?
According to Ubiquiti’s data sheet, the Lite and the Pro have an effective range of 122 meters (400 feet), while the LR stretches to 183 meters (600 feet).
Can I use UniFi AP without controller?
UniFi APs can run by themselves without the controller unless features like guest portal is enabled (as UniFi controller also functions as a captive portal). Restarting the controller won’t restart your APs.
How many access points does my house have?
If you are looking for a benchmark to make a rough estimate however, you may approximate one access point per every 1000 square feet. Knowing the area in square feet or meters is a good start. As mentioned above, a very rough estimate is approximately one access point for every 1000 square feet.
What does a UniFi AP do?
All 2nd gen or newer UniFi APs can utilize wireless backhaul to function as mesh APs, not just these mesh models. The mesh models do feature more sensitive antennas, which help them with wireless backhaul and long range performance. Those qualities can make them great indoor access points as well.
What is the range of UniFi access point?
UniFi AP (UAP)
This is our standard model 802.11n MIMO UniFi AP. It is capable of speeds of up to 300 Mbps with a range of up to 122 m (400 ft).
What is WiFi 6 Ubiquiti?
The Access Point WiFi 6 Long-range (U6 LR) is a high-performance access point that brings powerful, four-stream WiFi 6 coverage to enterprise networks. The U6 LR can reach an aggregate throughput rate up to 3 Gbps with its 5 GHz (4×4 MU-MIMO and OFDMA) and 2.4 GHz (4×4 MIMO) bands.
Will WiFi 6 help older devices?
WiFi 6 routers are 100% backwards compatible with WiFi 5 and older WiFi devices. While you may not get to experience WiFi 6 from day one, you can make sure that your network is ready for new devices with WiFi 6 sooner than later. Like-to-like, WiFi 6 increases the speed for even one device by 40% as compared to WiFi 5.
Is ubiquiti a mesh network?
Ubiquiti Unifi
The final type of mesh network solution is the enterprise-grade (yet still affordable) Unifi system by Ubiquiti. To use Unifi, your house needs to be wired for Ethernet. The Access Points (APs) connect to an Ethernet port and broadcast a wifi signal.
Is ubiquiti better than Cisco?
If you are looking for fine-grain control over a large network, then Cisco is undoubtedly the best choice for your business. If you’re worried about budget and ease of use, then Ubiquiti is the way to go. Ubiquiti software does most of the heavy lifting, and the units can be set up with little networking knowledge.
Who uses Ubiquiti?
Who uses Ubiquiti Networks?
| Company | Website | Company Size |
|---|---|---|
| Eze Castle Integration, Inc. | eci.com | 200-500 |
| QA Limited | qa.com | 1000-5000 |
| George Mason University | gmu.edu | 1000-5000 |
| CONFIDENTIAL RECORDS, INC. | confidentialrecordsinc.com | 1-10 |
Is Ubiquiti WiFi good?
We have found that the UniFi 6 Long Range Access Point delivers excellent performance with a range of Wi-Fi 6 and Wi-Fi 5 client devices, at a price that is little different from the diminutive (and excellent) Wi-Fi 5 NanoHD product – our favourite Access Point for 2020.
Do ubiquiti access points work with any router?
UniFi Wi-Fi access points are not routers, which is why you’ll need to use something else as your router. This is likely going to be what your Internet provider gave you, or whatever existing all-in-one Wi-Fi router you were using before. Yes, you will need something to deliver power to the access points.
Does UniFi 6 Lite support mesh?
Ubiquiti’s first Wi-Fi 6 UniFi access points are the U6-Lite and the U6-LR. The U6-Lite is a replacement for the AC-Lite, and it’s available for $99.It’s worth noting that only the U6-Pro and U6-Mesh feature 2.4 GHz Wi-Fi 6 support. None of the other models feature upgraded 2.4 GHz radios.
Is UAP AC Pro discontinued?
This model has been discontinued, it is replaced by the previous model, which comes with a PoE injector – the UAP AC PRO.
How do you find the UniFi AP model?
You can easily determine your device model by going to the Devices section in your UniFi application and referencing the Model column.
Why do I need UniFi controller?
The software monitors and collects statistics about your network. UniFi devices don’t have a lot of storage, and they require the controller software to log information about your network. Having it running all the time also saves you some configuration headaches, especially on a remote network.