How To Log Into Ubiquiti Access Point?

Windows users: Start > All Programs > Ubiquiti UniFi. 2. The UniFi login screen will appear. Enter the admin name and password in the appropriate fields and click Login.

Contents

How do I log into UniFi AP Pro?

After you have installed the software and run the UniFi Installation Wizard, a login screen will appear for the UniFi Controller management interface. Enter the Admin Name and Password that you created and click Log In.

How do I SSH into an UniFi AP?

Open your favorite SSH client (PuTTY for windows) or Terminal on any other OS. Use the IP address for the AP found in DHCP to SSH into the AP with the default user/password provided ubnt/ubnt or root/ubnt. Next you will receive a splash screen of ASCII text saying UniFi and be at a command prompt.

What is the username and password for UniFi AP?

ubnt / ubnt
As long as the UniFi Access Point has not been previously setup or adopted by the software, and only if you are attempting to connect via SSH, then always use the default username and password of ubnt / ubnt.

How do I manage my ubiquiti access points?

To manage our access points we are going to install the Unifi Controller.
Configure Devices

  1. Check your local firewall.
  2. Download the Ubiquiti Device Discovery Tool from the Chrome App store.
  3. Reset the Access Point, hold the reset button for 5 sec to set it back to factory settings.

How do I make my ubiquiti access point default?

Restore to Factory Default Settings Press and hold the Reset button for more than five seconds. Alternatively, the UniFi AP may be reset remotely via a Reset button located on the bottom of the Gigabit PoE adapter.

Can I use Ubiquiti access point without controller?

UniFi APs can run by themselves without the controller unless features like guest portal is enabled (as UniFi controller also functions as a captive portal). Restarting the controller won’t restart your APs.

How do I SSH into a device?

How to setup SSH keys

  1. Step 1: Generate SSH Keys. Open the terminal on your local machine.
  2. Step 2: Name your SSH keys.
  3. Step 3: Enter a passphrase (optional)
  4. Step 4: Move the public key to the remote machine.
  5. Step 5: Test your connection.

How do I use SSH on Windows?

You can start an SSH session in your command prompt by executing ssh user@machine and you will be prompted to enter your password. You can create a Windows Terminal profile that does this on startup by adding the commandline setting to a profile in your settings.

How do I get my ubiquiti password?

To locate or change your device authentication credentials, launch UniFi Network and go to Settings > System > Application Configuration > Device SSH Authentication.

How do I change my UniFi access point password?

Log into the UniFi controller. Go to Settings (the gear icon in the bottom-left of the page). Go to the Site section (this is the default section you go to when going to the Settings page). Make the desired changes in the “DEVICE AUTHENTICATION” section at the bottom of the page.

How do I log into my cloud key?

The default login is ubnt/ubnt. After the UniFi Setup Wizard is finished, the UniFi Controller management interface will appear. Log in with the Admin Name and Password that you created, and then you can manage your UniFi devices and view network statistics using the UniFi Controller management interface.

Do ubiquiti access points work with any router?

UniFi Wi-Fi access points are not routers, which is why you’ll need to use something else as your router. This is likely going to be what your Internet provider gave you, or whatever existing all-in-one Wi-Fi router you were using before. Yes, you will need something to deliver power to the access points.

What is UniFi access point?

The UniFi® Enterprise Wi-Fi System is a scalable enterprise access point solution designed to be easily deployed and managed. UniFi Access Point (AP) indoor models have a sleek design and can be easily mounted to a ceiling tile or wall using the included mounting hardware.

What is the default IP for UniFi AP?

192.168.1.20
1. X scheme if you are connecting to the AP using its default IP of 192.168. 1.20.

How do I force adopt UniFi?

Device adoption is the process of connecting a UniFi device to its corresponding UniFi application in order to manage it.
Adoption via the UniFi Network web application

  1. Launch the Network web application from unifi.ui.com.
  2. Open the UniFi Devices page.
  3. Select the device that is ready for adoption.
  4. Click Adopt.

How do I restart UniFi?

How to Reboot Unifi Access Point from Unifi Controller

  1. Log in to the Unifi Controller.
  2. Click on the Devices Tab.
  3. Click on the Access Point you wish to restart.
  4. On the right-hand side fly in click on the tools icon.
  5. Scroll down and click on Open Terminal.
  6. On the terminal that opens type in reboot and hit enter.

How do I manually add Unifi access point?

Manually Adding Ubiquiti Unifi Access Point To Unifi Contoller

  1. Write down (or take a picture on your phone) the MAC address for the new AP.
  2. Connect the new Unifi AP.
  3. Check DHCP to see what IP address was given to the Unifi AP by searching for the MAC address in the DHCP clients table.

Can you plug access point into router?

Use an Ethernet cable to connect the access point to the router. The cable should be inserted into a LAN port on the router and into the main Ethernet port on the access point.If it is necessary to provide access to the Internet over the local area network, use an Ethernet cable to connect the router to the modem.

Why does Unifi need a controller?

The software monitors and collects statistics about your network. UniFi devices don’t have a lot of storage, and they require the controller software to log information about your network. Having it running all the time also saves you some configuration headaches, especially on a remote network.

How do I log into SSH with private key?

2.3 Login using your private key
Find your id_rsa. ppk file, open it, then click Open to start the connection. You should be prompted for your username as before (sysadm), but then instead of being prompted for a password, you are asked for the passphrase for your private key. Enter it, and you should be logged in.