Click Add Bluetooth or other device. Click Add Bluetooth or other device to start searching for the device. Click Bluetooth as the kind of device you want to add. Select HP Travel Mouse from the list of devices, and then wait until the connection is complete.
Contents
Press the blue Connect button on the bottom of the mouse or keyboard and hold it down for 10 seconds. Synchronize the wireless devices as follows: Turn the computer around and find the wireless receiver on the back. Pull down on the USB receiver to unplug it from the USB slot.
How do I reset my HP Bluetooth mouse?
Search for and open HP Accessory Center, and then click the Settings button. Select the Device Reset tab, and then follow any prompts to reset the mouse to default settings.
How do I turn on my HP wireless mouse?
On the bottom of the mouse, remove the battery cover, insert the battery, then replace the cover. Slide the mouse power button to ON. Insert the USB wireless receiver into a USB port on your computer. On the bottom of the mouse, press the Connect button.
How do I connect my HP wireless mouse without USB receiver?
How to connect the Bluetooth device to the computer
- Press and hold the Connect button on the bottom of the mouse.
- On the computer, open the Bluetooth software.
- Click the Devices tab, and then click Add.
- Follow the instructions that appear on the screen.
Why is my wireless mouse not connecting?
Fresh batteries are the cure for many wireless mouse problems.Verify it has been installed, to make your mouse ready to use. If the receiver is plugged in, and you’ve tried all other troubleshooting steps, try moving the receiver to a different USB port, if one is available. USB ports can go bad, making them unusable.
How do I get my wireless mouse to work?
Turn Bluetooth on. Press and hold the sync button on the bottom of the mouse. The mouse now appears in the list of devices. Choose the mouse in this list to connect it to your computer.
How do I switch between Bluetooth mouse devices?
Type “Bluetooth” in the top search bar. Click “Change Bluetooth Settings” and go to the “Options” tab. Allow Bluetooth devices to connect to this computer” and “Alert me when a new Bluetooth device wants to connect.” This enables discovery mode, which allows your computer to find your Bluetooth mouse.
Why is my HP laptop mouse not working?
Make sure that the laptop touchpad has not accidentally been turned off or disabled. You might have disabled your touchpad on accident, in which case you will need to check to make sure and if needed, enable the HP touchpad again. The most common solution will be to double tap the top left corner of your touchpad.
Why is my HP mouse blinking orange?
Some times if the light blinks it could be due to low battery, so I would suggest you could try to replace the batteries on the mouse and then try to re-synchronize the mouse and keyboard and then check if that helps.
How do I get my mouse to work on my HP laptop?
To get the mouse working again on your HP laptop, try each of the following troubleshooting steps in order:
- Make sure the touchpad isn’t disabled.
- Try rebooting your computer.
- Check the touchpad settings.
- Use HP Assistant to check for driver updates.
- Use the HP Assistant to check your hardware.
- Update Windows drivers.
How do I connect a wireless mouse without USB?
How to connect HP wireless mouse without receiver (and how about other brands?)
- Buy a new mouse. A new mouse will come with a new receiver or dongle. You can establish the connection again and look after it.
- Connect over Bluetooth. Many mice allow a Bluetooth connectivity as well.
Can I use a Bluetooth mouse without dongle?
Yes, you can use a Bluetooth mouse without its USB dongle
If your notebook, laptop, or desktop PC already has a Bluetooth connection, then USB dongle may not be necessary to be plugged in.Meanwhile, USB Bluetooth dongle designed to immediately connect with the mouse seamlessly.
How do I pair my HP mouse keyboard with another non Unifying receiver?
To do this on a Windows 10 PC, go to Settings > Devices > Add Bluetooth. On your mouse, press the Connect button; the device should appear as an available Bluetooth device on your screen. Select it to complete the pairing process and use your mouse.
Pair your mouse with Bluetooth
Press and hold the pair button on the bottom of the mouse until the LED light starts to flash (about 5 seconds). On your Windows 11 PC, select Connect if a notification appears for your mouse, then wait for it to get set up.
Why is Bluetooth mouse not working?
This will re-enumerate the Bluetooth receiver and the mouse will be re-detected. If this doesn’t work, you can also try re-enumerating by turning the power on the Bluetooth receiver off and then on, unplugging and plugging the dongle for the receiver (if there is one), or restarting the computer.
How do I reset my Bluetooth mouse?
To reset a wireless mouse:
- Turn off your wireless mouse.
- Hold down the left and right mouse buttons.
- While holding down the mouse buttons, turn the mouse back on.
- After around 5 seconds, release the buttons. You will see an LED flash if it resets successfully.
Why is my computer not recognizing my mouse?
A: In most cases, when a mouse and/or keyboard become unresponsive, one of two things are to blame: (1) The batteries in the actual mouse and/or keyboard are dead (or are dying) and need to be replaced; or (2) the drivers for either or both devices need to be updated.
How do I connect my HP wireless mouse to my Mac?
How to connect a wireless mouse to a Mac
- Turn the mouse on, and make sure it’s within range of your Mac.
- Click the Apple icon in the top-left corner of the screen.
- Select “System Preferences…”
- Click the “Bluetooth” icon.
- If it’s not already on, select “Turn Bluetooth On.”
- Wait for your mouse to appear on the list.
How do I resync my wireless mouse?
Resyncing the setup is fairly easy. There is usually a Connect button somewhere on the USB receiver. Press that, and a light on the receiver should start flashing. Then press the Connect button on the keyboard and/or mouse and the flashing light on the USB receiver should stop.
Can Bluetooth mouse be connected to two devices?
That’s where a multi-device Bluetooth mouse like the Logitech M585 comes in handy. It has the ability to pair with multiple devices, then toggle between them through the use of a centre mounted button.A Bluetooth mouse is able to connect instantly with any device with Bluetooth pairing ability.