Make sure you read the ruler from left to right. If you are measuring something, align it with the left side of the zero mark on the ruler. The left side of the line where the object ends will be its measurement in inches.
Contents
What are the lines between inches?
The number of lines between inch marks indicate how precise you can get with your tool. To read 1/2-inch measurements, locate the second-longest mark between the longer inch marks. For 1/4-inch marks, look halfway between the 1/2-inch marks. You can read smaller fractions of an inch the same way.
Where is 0.75 inches on a ruler?
Fraction, Decimal, and Millimeter Equivalent Measurements
| Fraction | Decimal | Millimeters |
|---|---|---|
| 11⁄16“ | 0.6875 | 17.4625 |
| 3⁄4“ | 0.75 | 19.05 |
| 13⁄16“ | 0.8125 | 20.6375 |
| 7⁄8“ | 0.875 | 22.225 |
How long is a ruler?
12 in or 30 cm in length is useful for a ruler to be kept on a desk to help in drawing. Shorter rulers are convenient for keeping in a pocket. Longer rulers, e.g., 18 in (46 cm), are necessary in some cases. Rigid wooden or plastic yardsticks, 1 yard long, and meter sticks, 1 meter long, are also used.
What does 19/32 convert to in inches?
The decimal equivalents of eights, sixteenths, thirty-seconds and sixty-fourths of an inch.
| Inches | |
|---|---|
| fractional | decimal |
| 19/32 | 0.59375 |
| 21/32 | 0.65625 |
| 23/32 | 0.71875 |
How many inches is 23 32?
Thicknesses
| NOMINAL VS. ACTUAL SIZES | |
|---|---|
| 1/4-inch | 11/32 |
| 1/2-inch | 15/32 |
| 5/8-inch | 19/32 |
| 3/4-inch | 23/32 |
How thick is 7 32 inches?
Here are helpful charts for determining Material Thickness of steel and aluminum, plus gage sizes.
Fraction-Decimal-Millimeter Conversions.
| FRACTION | DECIMAL | MILLIMETER |
|---|---|---|
| 11/64 | .1719 | 4.3656 |
| 3/16 | .1875 | 4.7625 |
| 13/64 | .2031 | 5.1594 |
| 7/32 | .2188 | 5.5563 |
What does 5/16 look like on a ruler?
The very first line on the left hand side of the ruler is the 1/16 of an inch mark. Between 0 and 1 inch, there are marks that denote 1/16, 2/16 (or 1/8), 3/16, 4/16 (or 1/4), 5/16, 6/16 (or 3/8), 7/16, 8/16 (or 1/2), 9/16, 10/16 (or 5/8), 11/16, 12/16 (3/4), 13/16, 14/16 (or 7/8), 15/16, 16/16 (or 1) of an inch.
What is 1.2 inches on a ruler?
MM, CM to inches conversion table
| MM | CM | Approximate Fractional Inches |
|---|---|---|
| 12 mm | 1.2 cm | Just short of 1/2 Inch |
| 13 mm | 1.3 cm | Little over 1/2 Inch |
| 14 mm | 1.4 cm | 9/16 Inch |
| 15 mm | 1.5 cm | Just short of 5/8 Inch |
How do you tell the difference between feet and inches?
The IEEE standard symbol for a foot is “ft”. In some cases, the foot is denoted by a prime, often approximated by an apostrophe, and the inch by a double prime; for example, 2 feet 4 inches is sometimes denoted as 2′ 4″.
What is 0.1 on a ruler?
If there are 10 the smallest graduation or mark is 1/10” or 0.1” as a decimal. If there are 100 the smallest graduation or mark is 1/100″ or 0.01″ as a decimal, etc.
What is the inch symbol?
The international standard symbol for inch is in (see ISO 31-1, Annex A) but traditionally the inch is denoted by a double prime, which is often approximated by double quotes, and the foot by a prime, which is often approximated by an apostrophe. For example; three feet, two inches can be written as 3′ 2″.
How many inches is a ruler?
12 inches
Remember, for this lesson you are using inches. Some rulers, like the ruler in the above image, have a label that says ‘inches,’ ‘inch’ or ‘in. ‘ If you do not see any of these labels, look for the side that has numbers one through 12 (since there are typically 12 inches on a ruler).
How long is a Millimetre?
The millimetre (international spelling; SI unit symbol mm) or millimeter (American spelling) is a unit of length in the metric system, equal to one thousandth of a metre, which is the SI base unit of length. Therefore, there are one thousand millimetres in a metre. There are ten millimetres in a centimetre.
Which part of the ruler is inches?
The inch is the biggest unit on a ruler and is represented by the longest line. Each 1-inch line is labeled with a number indicating what inch it is on the ruler (as the image above shows).
How do you measure height with a 30cm ruler?
Place one end of the ruler flat on the floor and position it so it’s pressed vertically against the wall. Mark the top end of the ruler with a pencil. Then, move the ruler up so the bottom aligns with that pencil mark and mark the new top edge. Repeat this process until you’ve reached the mark for your height.
How many centimeters are in a 12 inch ruler?
30 centimeters
Answer: There are 30 centimeters displayed on a 12-inch ruler.
Why is ruler called ruler?
If you’re a queen, a sultan, or a czar, you’re a ruler. Besides “person who rules or governs,” you can define ruler as a measuring device that’s marked with inches or centimeters.Both meanings stem from the verb rule, “to exercise power” or “to control,” which came to also mean “mark with lines” in the 1590s.
What is 29 32 on a tape measure?
| INCHES | DECIMAL OF AN INCH | MILLIMETERS |
|---|---|---|
| 29/32 | .90625 | 23.018750 |
| 59/64 | .921875 | 23.415625 |
| 15/16 | .9375 | 23.812500 |
| 61/64 | .953125 | 24.209375 |
What is 3 32 on a tape measure?
For example, an object that is three lines beyond the 3-inch mark on a tape measure marked in thirty-seconds would be 3 and 3/32 inches long.
What is 19 32 on a tape measure?
18/32” reduces to 9/16” and 20/32” reduces to 5/8”, therefore 19/32” is the 1/32 mark between 9/16” and 5/8”.