Turn the headset on. Press and hold the call control button for about 5-6 seconds until the light on the headset starts flashing an alternating red-blue. Release the button and set the headset aside. On your cell phone, go to the Bluetooth menu and search for (or add) a device.
Contents
How do I put my Plantronics headset in pairing mode?
Start with your headset powered on. Press and hold the call control button for 5 or 6 seconds until the light starts flashing red and blue (some models flash red and white). Release the button and set the headset aside. Follow the pairing instructions for your cell phone or other Bluetooth device.
How do I pair my Plantronics Bluetooth headset to my phone?
Go to Settings menu on the Android phone. Ensure Bluetooth is enabled, and then tap Bluetooth to access the settings. Tap Search or Scan (depending on the phone) so the phone can locate the headset. Once the phone finds the headset, tap PLT_Legend to complete the pairing process.
How do I pair Plantronics PLT with iPhone?
To pair your Plantronics Bluetooth headset with your iPhone:
- On your iPhone, press Settings > General > Bluetooth.
- If Bluetooth is turned Off, tap to turn it On.
- Place your Bluetooth headset into pairing mode.
- When you see your Plantronics device name, tap it to pair and connect.
Why won’t my Plantronics Bluetooth connect to my phone?
If the headset is listed in your cell phone’s list of paired devices, but will not connect to the phone, please try the following: Delete the headset from your cell phone’s list of paired devices.Pair the headset with your phone again. If the issue persists, try pairing the headset to a different cell phone.
Why won’t my Plantronics Bluetooth connect to my iPhone?
You should first make sure Bluetooth is turned on and try connecting your device in the Bluetooth settings. If your iPhone still won’t connect to Bluetooth, you can try deleting other devices from Bluetooth settings, updating your iOS software, resetting your network settings, or restarting your iPhone entirely.
How do I reset my Plantronics Bluetooth headset?
Reset Plantronics Bluetooth Headset
- Remove the Plantronics headset from your cell phones paired devices.
- Power your cell phone off, then power it back on.
- Pair your Plantronics headset back to your cell phone (follow manual if unsure how)
- Your Plantronics headset should now be reset.
How do I fix the Bluetooth pairing problem?
What you can do about Bluetooth pairing failures
- Make sure Bluetooth is turned on.
- Determine which pairing process your device employs.
- Turn on discoverable mode.
- Make sure the two devices are in close enough proximity to one another.
- Power the devices off and back on.
- Remove old Bluetooth connections.
Why is Bluetooth paired but not connected?
If your Bluetooth devices won’t connect, it’s likely because the devices are out of range, or aren’t in pairing mode. If you’re having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet “forget” the connection.
How do I pair my Plantronics Voyager 8200?
Activate Bluetooth on your phone and set it to search for new devices.
- iPhone Settings > Bluetooth > On*
- Android Settings > Bluetooth: On > Scan for devices*
How do I reset my Plantronics Voyager headset?
Hold down the MINUS (-) volume control and the black power button at the same time until the blue light goes out. Step 3 Wait 1 minute for the reset to power down the software and clear firmware. Step 4. Power back up as normal.
How do I force a Bluetooth device to pair?
Go to settings, Bluetooth, and find your speaker (There should be a list of Bluetooth devices that you last connected to). Tap on the Bluetooth speaker to connect, then turn the speaker on AFTER you pressed the connect button, while your device is trying to connect to it.
What is pairing mode?
Filters. Establishing a connection between two Bluetooth devices. For example, to pair a headset with a phone, the phone is configured to “Discoverable” mode and the headset is set up to pair by pressing one or more keys for some number of seconds.
What is the passcode for pairing Bluetooth?
0000
Use the code 0000 when pairing with another Bluetooth® device. The passcode may appear as Pass key, PIN code, PIN number, or Password depending on the Bluetooth device used.
How do you pair a paired controller?
- Go to Settings > Devices > Bluetooth (on Windows 11: Settings > Bluetooth & devices).
- Select the controller and then select Remove device.
- Press the Pair button on your controller.
- Select the controller and then select Pair.
How do you make a device discoverable?
Steps to make your PC or laptop discoverable via Bluetooth
- Click the Windows icon and select Settings.
- Select Devices.
- In the opened window, click Bluetooth & other devices on the Devices menu.
- In the opened Bluetooth Settings window, make sure the option Allow Bluetooth devices to find this PC is checked.
How do I pair a Bluetooth headset with my iPhone?
Bluetooth Headsets: How to Pair with an iPhone
- On your iPhone, press Settings > General > Bluetooth.
- If Bluetooth is turned Off, tap to turn it On.
- Place your Bluetooth headset into pairing mode.
- When you see your Plantronics device name, tap it to pair and connect.