Turn off both earbuds, then turn them both on at the same time by long pressing the Multi-Funciton Button for more than 8 seconds. The LED indicators will flash red and blue, then will flash blue when the earbuds are paired with each other. Pair with your Bluetooth® device.
Contents
How do I pair my Brookstone Bluetooth headphones?
BLUETOOTH® OPERATION (DUAL EARBUDS)
Turn each earbud on at the same time by pressing the power button for 7-10 seconds. The two earbuds will begin to pair to each other automatically.
How do you put wireless headphones in pairing mode?
Turn on the connecting Bluetooth device and place it within 3 feet (1 meter) of this unit. /POWER button (for the headphones) for more than 7 seconds while the Bluetooth headphones are turned off. When the indicator starts to blink quickly, release the button. The Bluetooth headphones enter Pairing mode.
How do I pair my Brookstone Bluetooth headset with my Iphone?
To begin the pairing process, press and hold the POWER BUTTOn at the bottom of the RIgHT EARCUP for 5 seconds or until you see the LED InDICATORS flashing quickly . 3 . Enable the Bluetooth service on your mobile device and search or scan for the “BT-H31” device .
How do I connect my Brookstone Bluetooth transmitter?
Hold power button until it flashes red and blue. 3. Choose “Connect by Brookstone” on your Bluetooth device. Then you should be ready to go.
Can’t get both wireless earbuds working?
Sync earbuds together by following steps below:
- Forget all “Wicked Driftr” in your device’s Bluetooth settings.
- Turn off Bluetooth setting on your device.
- Replace both earbuds back into the charging case.
- Remove earbuds from charging case.
- Turn Bluetooth back on on your device.
How do I reset my Brookstone Airpods?
While in the Charging Case, touch and HOLD the multifunction touchpad of either earbud for 8 seconds until the LED of that earbud flashes RED 3 times. This will clear the pairing information.
Why are my Bluetooth headphones not showing up?
If your Bluetooth devices won’t connect, it’s likely because the devices are out of range, or aren’t in pairing mode. If you’re having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet “forget” the connection.
Why is my Bluetooth headset not visible?
For Android phones, go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile & Bluetooth. For iOS and iPadOS device, you’ll have to unpair all of your devices (go to Setting > Bluetooth, select the info icon and and choose Forget This Device for each device) then restart your phone or tablet.
Why won’t my Bluetooth headphones connect to my iPhone?
You should first make sure Bluetooth is turned on and try connecting your device in the Bluetooth settings. If your iPhone still won’t connect to Bluetooth, you can try deleting other devices from Bluetooth settings, updating your iOS software, resetting your network settings, or restarting your iPhone entirely.
How do I connect my Bluetooth headphones to Windows 10?
Steps to add a device via Bluetooth in Windows 10
- Make sure Bluetooth is On.
- Click Add Bluetooth or other device.
- Select Bluetooth in the Add a device window.
- Wait while your PC or laptop scans the Bluetooth devices nearby.
- Click on the name of the device you want to connect to, until the PIN code appears.
How do I pair a Bluetooth headset with my iPhone?
Bluetooth Headsets: How to Pair with an iPhone
- On your iPhone, press Settings > General > Bluetooth.
- If Bluetooth is turned Off, tap to turn it On.
- Place your Bluetooth headset into pairing mode.
- When you see your Plantronics device name, tap it to pair and connect.
Why can I only hear out of one Bluetooth earbud?
Headsets may play only in one ear depending on your audio settings. So check your audio properties and make sure that the mono option is turned off. In addition, make sure that voice levels are balanced on both earbuds.The voice levels must be equal on both sides of your headset.
Why is my Bluetooth headphones only working on one side?
Mono basically plays the same audio in both ears, but can sometimes cause this issue. The balance problem occurs when the balance scale may be turned all the way to the left or right. You can check for mono and balance settings in your device’s Accessibility settings. You’ll see a slider displaying left and right.
How do you get both earbuds to work at the same time?
Place each earbud on the desk in front of you and hold down both for 8 seconds until they turn off. Place in cradle for a couple of seconds. Take them out of the cradle. Hold down on both until they turn on, they should be flashing.
How do you sync earbuds?
How to Link Wireless Earbuds on Android
- Swipe down the Notifications shade.
- Press and hold the Bluetooth icon in the top row of icons.
- Make sure the toggle switch at the top of the menu is On.
- Tap Pair.
Why won’t my phone Recognise my headphones?
Check audio settings and restart the device
There’s also a chance the problem isn’t with the jack or the headphones you’re using but has to do with the device’s audio settings. If this is the case, you’ll be able to sort it out in no time. The most obvious fix is to check if you muted your phone or put the volume down.
Why is my phone not registering my headphones?
It’s possible that you have paired your phone with a wireless device that has turned off your headphones. First, you can check to see if this is the problem by turning off Bluetooth.If they’re still not working, there is another thing to check with Bluetooth. Your second option is to go to Settings, then Connections.
How do I get my iPhone to recognize Bluetooth devices?
Pair your device with a Bluetooth accessory
- On your device, go to Settings > Bluetooth and turn on Bluetooth.
- Place your accessory in discovery mode and wait for it to appear on your device.
- To pair, tap your accessory name when it appears onscreen.
Why won’t my iPhone find my headphones?
Make sure that your Bluetooth accessory and iOS or iPadOS device are close to each other. Turn your Bluetooth accessory off and back on again. Make sure that your Bluetooth accessory is on and fully charged or connected to power. If your accessory uses batteries, see if they need to be replaced.
Why won’t my Bluetooth headphones connect to Windows 10?
You’ll see “Not connected” if your Windows 10 device isn’t paired to any Bluetooth accessories. Check in Settings. Select Select the Start button, then select Settings > Devices > Bluetooth & other devices . Make sure Bluetooth is turned on.