How To Print From Bypass Tray?

When you return to your computer:

  1. Select File.
  2. Select Print.
  3. Select Printer Properties.
  4. For Paper Source: select Bypass.
  5. For Paper Type: leave as plain or select the appropriate type such as Thick 1 for labels, Thick 2 for cardstock, etc.
  6. Click OK.
  7. Click Print.

Contents

Why won’t my printer print from the bypass tray?

The Tray 5 (Bypass Tray) needs to have the same paper the document selected loaded in it. As well you must select Tray 5 (Bypass Tray) from Printer Properties and also in Page Setup. Ensure Correct Paper is loaded in Tray 5 (Bypass Tray).

How do I print to bypass tray in PDF?

Click “File” then “Print” Page 12 This window will open. Make sure your sharp printer is selected in “Name” then click “properties” Page 13 In the “Properties” window, select the “Paper Source” tab. Under the “Paper Source” tab, select the drop-down arrow next to “Paper Tray” and select the bypass tray.

How do I print to a specific tray?

NOTE: The steps may differ depending on your application.

  1. From within your application, click File => Print.
  2. Click Properties.
  3. Click on the Basic tab.
  4. In the Paper Source dropdown choose the Tray that you want to print from.
  5. Click Apply => OK.
  6. Click OK or PRINT, depending on your application.

How do I disable Toshiba bypass tray?

To exclude the bypass tray from the trays that can be selected when [Auto Select] is selected: In “Setting mode (administrator)”, select [System Settings] → [Printer Settings] → [Default Settings] → [Bypass Tray Settings] → [Exclude Bypass-Tray from Auto Paper Select].

What is bypass facility in printers?

The bypass tray, also known as the multi-purpose tray or general-purpose tray, is a tray on your copier that can be used to print jobs on media that cannot be run from the main trays of your device.

How do I print labels from bypass tray Xerox?

While the file is open:

  1. Select File > Print >
  2. Select Print Properties >
  3. Select the “Paper” dropdown >
  4. Choose “Other Type”
  5. Select “Labels” as the type.
  6. 6. ( Optional) Select “Output.
  7. Destination” dropdown > select.
  8. Press OK, > Print.

How do I print from Xerox tray 5?

Printing from Xerox Bypass Tray in Library InfoCommons

  1. Under Paper, click on the down-drop arrow.
  2. Choose “Select By Tray“.
  3. Choose “Tray 5 (Bypass)“

How do I print two different trays?

Enable the Additional Paper Tray in Printer Properties

  1. Click on the start button.
  2. Select “View Devices and Printers”.
  3. Right click on the printer icon, select “Printer Properties”.
  4. Select the “Printer” tab.
  5. In the “Printer Option Configuration” section of the dialogue, select how many trays have been installed.

How do I print a pick tray on a Mac?

For Mac OS X

  1. Open the file to print.
  2. Select [Print] from the [File] menu.
  3. Select [Print Options] from the panel menu.
  4. Check the [Tray Switch] check box in the [Feed] tab.
  5. Change other settings if necessary, and then click [Print]. Memo.

How do I select a printer tray on a Mac?

Re: Choosing a paper tray from Mac
(Presumably, while the printer is turned off.) turn the printer on, then go to the Mac System preferences and select the “Printers & Scanners” icon. Next find your printer on the list of installed devices, and select it.

How do I get my printer to print from Tray 1?

  1. Select [Print] from the [File] menu.
  2. Click [Preferences] (or [property]).
  3. On the [Setup] tab, select a paper size from [Size].
  4. Select [Tray 1] from [Source].
  5. Click [OK].
  6. Click [Print] on the [Print] Screen.

How do you put legal paper in a printer?

Load legal size paper in the paper tray.

  1. If the paper support flap (1) is open, close it.
  2. Close the paper support (2).
  3. Pull the paper tray completely out of the machine.
  4. Open the output paper tray cover (1).
  5. Gently press and slide the paper width guides (1) and paper length guide (2) to fit the Legal paper.

How do I make my Brother printer print with different trays?

You can change the default tray your Brother machine uses for printing copies by following these steps:

  1. Press MENU and choose General Setup => Tray Use => Copy.
  2. Press the UP OR DOWN ARROW key to select a setting.
  3. Press the OK key.
  4. Press the STOP/EXIT key.

How do I print to the bypass tray on a Ricoh printer?

While pressing and holding the button in the upper center of the bypass tray, pull the tray open. Slide both sides of the paper guide outward, and then load paper print side up until it stops. Adjust both sides of the paper guide to match the paper width.

Where is the bypass tray on a Toshiba printer?

When printing on tab paper, be sure to place the paper with the print side facing up. For the bypass tray (on the large capacity trays), the dedicated guide must be installed in the bypass tray guides at the rear end. The dedicated guide is in the upper side of the large capacity trays.

How do you use the bypass tray on a Ricoh printer?

Open the bypass tray. Insert the paper face down until you hear the beep. While pressing down the release lever, align the paper guides to the paper size. If the guides are not flush against the paper, images might be skewed or paper misfeeds might occur.

Why is my Toshiba printer not printing?

Check whether the machine’s printer driver has been selected from the print window of the application. If the machine’s printer driver does not appear in the list of available printer drivers, it may not be installed correctly. Remove the printer driver and then install it once again. See also the Software Setup Guide.

How do I change the paper size in the bypass tray?

Press [Change Setting] on the bypass tray paper settings screen. Select the type of paper that is loaded. If you want to set the paper thickness, press [Paper Thickness] and set a paper thickness. Press [Next].

How do I disable bypass tray Xerox?

To disable a tray

  1. Right click one of the trays in the Paper Trays tab.
  2. Click Disable Tray from the Tray pull-down menu.

How do I use the Konica Minolta bypass tray?

To use the Bypass Tray, load paper and specify the paper type.

  1. Open the Bypass Tray.
  2. With the side to be printed on facing down, insert the paper as far as possible into the feed slot.
  3. Slide the Lateral Guide to fit the size of the loaded paper.
  4. When loading paper other than plain paper, change the paper type setting.