Contents
How do docking ports work KSP?
Docking was officially introduced in KSP 0.18 and allows separate ships to join into a single entity that is controlled as one and allows the transfer of resources and Kerbonaut between connected modules. To get close enough to even consider docking, you’ll need to perform an orbital rendezvous.
How do you change the docking control in KSP?
Press the “ Delete ” key to get into docking mode. (The “ Insert ” key takes you back to normal mode.) Press the ‘ F ‘ key to change between LIN and ROT (lower-left corner of the screen). The mode you want for driving is going to be LIN (the translation docking mode).
How do I switch between ships in KSP?
You can set alarms for maneuver nodes, Pe/Ap, AN/DN, transfer windows, and more. The alarms get attached to a particular vessel, and when they expire it will kill time warp and give you the opportunity to switch to that ship.
How do I make my KSP dock easier?
Click on your own docking port and select “control from here.” Then click on your target’s docking port and select “set as target.” That is all. Turn the camera sideways and watch the amazing spectacle of your two ships docking effortlessly.
How do you intercept targets in KSP?
- Place a maneuver somewhere and pull prograde until you get the intercept markers.
- Move the maneuver around the orbit around your orbit until you get a close intercept.
- IF you choose to move it to the next orbit, you will need to spin the maneuver around your orbit.
How do you match orbit and dock in KSP?
Docking / rendezvous
- Go to the map view and use the maneuver tool.
- Begin by matching your orbital inclination as described above.
- Bring one point on your orbit (ideally an apsis) tangent to the target orbit.
- At the point of nearest encounter maneuver to make:
- On reaching that encounter, burn to match velocity.
How do you drive a KSP in Rover?
By default, a rover is controlled with the keys W , A , S , & D . Unfortunately these keys also control vehicle rotation, which can make a rover completely uncontrollable on planets with low gravity. As a workaround for this problem, the rover controls can be remapped to different keys in the Settings menu.
Can a clamp-O-Tron docking port Jr?
The Clamp-O-Tron Jr. is a small docking port, useful for attaching small probes to other spacecraft. Using the Clamp-o-tron Jr.
| Clamp-O-Tron Docking Port Jr. | ||
|---|---|---|
| Radial size | Tiny | |
| Cost | (total) | 800.00 |
| Mass | (total) | 0.02 t |
| Drag | 0.25 |
How do you use thrusters in KSP?
Press R to turn on RCS, then use WASD, SHIFT, and CTRL. Turn on Docking Mode (bottom left corner) and then press V a few times to turn the camera to CHASE mode. This is probably the easiest way to use RCS thrusters.
How do you control RCS in KSP?
The Reaction Control System, or RCS, is a set of monopropellant-fuelled (with the exception of the Vernor Engine) thrusters primarily intended for vessel orientation in a vacuum. It is toggled on and off by pressing the R key (default key binding).
How do you switch between planes in KSP?
Outside that range you have two options:
- Go back to the space centre, enter the tracking station, select the vessel you want in the list on the left and click the green “fly” button at the bottom left.
- Switch to map view, right click on the vessel in the map and select “Switch to” on the resulting menu.
How do you switch between crafts quickly in KSP?
You use the left [ and right ] keys to switch between crafts.
How do you use the EVA suit in KSP?
Each kerbal is equipped with a single flag at the start of every EVA. Remove a previously planted flag (Right-click on flag → Remove Flag). The flag goes into their inventory and may be replanted at a new location. Read the plaque on a flag.
How do you rescue stuck in orbit KSP?
You have to be very careful that you don’t damage anything, and take it in stages.
- Get the disabled ship into an aero-breaking orbit.
- thrust the rescue ship backwards using RCS, put that one in a stable orbit.
- switch over to the disabled ship and follow it all the way down.
- deorbit the rescue ship.
How do you set maneuver nodes in KSP?
Adding a maneuver node
Click on the vessel’s orbital line and a popup will give the option to add a new maneuver node. Once created, selecting and right-clicking the node gives the option to delete it. If the maneuver node has been passed, selecting it immediately puts it in “delete” mode.
How do you transfer fuel in KSP?
To transfer fuel you will have to dock your vessels. This can be done either using docking ports on both vessels or a “grabbing unit” aka the “claw” on one of them. You will also need to have at least one upgrade of the science facility back at the Kerbal Space Center to enable resource transfer.
How do you target an orbit in KSP?
Fine tuning orbit
- Go to Map mode and click your target, and select “Set as target”.
- You will see Ascending Node and Descending Node markers appear on your orbit.
- Execute the burn.
How do I use SAS in KSP?
The system can be toggled with (by default) the T key and temporarily switched by holding down the F key (for example, if SAS is on, holding F will turn it off, and releasing F will turn it back on). The current state of the SAS system is shown by a blue light on the navball.
How do you unlock maneuver nodes in KSP?
You have to unlock both the second level Tracking Station and the second level Mission Control. You are looking for the “Flight Planning” upgrade. Note that it is the second level of each building, not the third. Neither building needs the third level upgrade before maneuver nodes are available.
What is traction control in KSP?
The traction control value can be tailored to individual vehicles to prevent wheelspin in different conditions. Traction control can be overridden and a manual limit to the motor output set. Friction control can be overridden and adjusted on a scale from 0.1-5.0.