How To Connect To My Linksys Wireless Router?

Connect the Cable modem to the router’s WAN or Internet port. Step 2: Connect a computer to any of the router’s numbered ports (1, 2, 3 or 4). If you are using a wireless computer, you will need to connect it first with an Ethernet cable.

Contents

How do I connect to my Linksys router?

How to access the router’s web interface

  1. Launch a web browser and enter “192.168. 1.1” in the Address bar then press [Enter].
  2. Enter your login credentials in the fields provided. The default password is admin.
  3. To know if you have successfully logged in to the web interface, the screen below should appear.

Why can’t I log into my Linksys router?

Reset Linksys to factory defaults
If the log-in window refuses to accept your password no matter what you do, it’s time to reset the router to factory defaults. To do so, press and hold the Reset button from the rear side of the device for about 10 seconds, until the power LED starts blinking.

How do I connect to my wireless router directly?

Plug one end of an Ethernet cable into your modem. Plug the other end of the Ethernet cable into the Internet, Uplink, WAN or WLAN port on your router. Plug in your router and allow at least 2 to 3 minutes for it to light up. Turn off your computer and connect an Ethernet cable to your computer.

How do I find my Linksys router on my network?

How to access the router’s web interface

  1. Launch a web browser and enter “192.168. 1.1” in the Address bar then press [Enter].
  2. Enter your login credentials in the fields provided. The default password is admin.
  3. To know if you have successfully logged in to the web interface, the screen below should appear.

What is the IP address for Linksys router?

192.168.1.1
By default, the IP address of a Linksys router is 192.168. 1.1.

How do I log into my 192.168 1.1 IP address?

How to Login 192.168. 1.1?

  1. Turn on your router and connect it to your computer with an Ethernet cable.
  2. Open your favorite web browser and type “http://192.168.1.1” into the address bar.
  3. Enter the correct router login/password combination.

How do I find out my Linksys router password?

Checking the Linksys Wi-Fi Router’s name and Password

  1. Launch Linksys Connect on the computer that was used to set up the Linksys Wi-Fi Router.
  2. On the Linksys Connect main screen, select Router settings.
  3. The Router name and Password are found under the Personalize section.
  4. Launch a web browser like Internet Explorer.

What is the admin password for Linksys router?

admin
The router’s default Password is “admin”, as for the User name, you can leave the field blank. For security purposes, it is recommended to change the default password. QUICK TIP: Changing the router’s password through the web-based setup page may prevent you from using the Linksys Connect software.

How do I log into my Linksys Smart WIFI?

Accessing your Linksys Smart Wi-Fi through a web browser

  1. Launch a web browser.
  2. Enter your router’s default IP address, “192.168.
  3. Enter your Router Password then click Log in.
  4. Launch a web browser and enter “linksyssmartwifi.com” in the Address bar then press [Enter].

How do you reset your Linksys router?

1 Factory Reset

  1. Ensure the router is ON.
  2. Using a paper clip, push and hold the Reset button.
  3. Hold the reset switch for 10-15 seconds.
  4. Disconnect and reconnect the router’s power adapter.
  5. Once it fully reboots, you can use the default username and password to connect the device.

Why is my router not connecting to the Internet?

Your router or modem may be out of date, your DNS cache or IP address may be experiencing a glitch, or your internet service provider could be experiencing outages in your area. The problem could be as simple as a faulty Ethernet cable.

How do you I access my router settings?

Find Your Router’s IP Address
You log into your router’s firmware through a browser. Any browser will do. At the address field, type the IP address of your router. Most routers use an address of 192.168.1.1.

How do I log into my Linksys Velop router?

How to log in to the Velop dashboard while on Bridge Mode

  1. Connect your mobile device to your Velop’s Wi-Fi and launch the Linksys app.
  2. Tap on Manage Your Wi-Fi.
  3. Once prompted, enter the necessary credentials for your account and tap Log in.
  4. You will be redirected to the Velop dashboard on Bridge Mode.

How do I set my Linksys router IP address?

Instructions

  1. Visit the router’s IP address in a new browser window. http://192.168.1.1 is the default Linksys router IP address.
  2. Enter the Network password. The “Enter Network Password” window will appear.
  3. Type in OpenDNS addresses in Static DNS 1 and Static DNS 2 fields.
  4. Click Save Settings button.

How do I access my PLDT router?

For PLDT Fibr, DSL and VDSL routers, the default username is admin and the password is also admin. The default gateway is 192.168. 1.1. You can login to your PLDT admin dashboard using those aforementioned credentials.

How can I access my PLDT Wifi router?

Type 192.168. 1.1 (the most common IP for PLDT routers) in the address bar of your web browser to access the router’s web-based user interface. The default username for your PLDT router is adminpldt. The default password is 1234567890.

How do I login as admin on WIFI?

Here’s how:

  1. Identify the IP address of the router. Most routers are manufactured to use a default address such as 192.168. 0.1, 192.168. 1.1, 192.168. 2.1, or 192.168. 1.100.
  2. Enter the administrative login information—username and password—to authenticate and access the admin settings.

How do I find my router username and password without resetting it?

To locate the default username and password for the router, look in its manual. If you’ve lost the manual, you can often find it by searching for your router’s model number and “manual” on Google. Or just search for your router’s model and “default password.”

How do I reset my Linksys wireless router password?

Follow the steps below to change your Wi-Fi password:

  1. Launch a web browser, enter “192.168. 1.1” in the Address bar then press [Enter].
  2. Enter your credentials in the fields provided.
  3. Click the Wireless tab, then click the Wireless Security sub-tab.
  4. In the Passphrase field, enter your preferred Wi-Fi password.
  5. Click.

What is the password for Linksys Smart WiFi?

admin
The default router password for all Linksys Smart Wi-Fi Routers is admin. However, it is recommended to personalize your password to ensure that the router is safe from unauthorized access.