To turn on your iPhone X, press and hold the Side button. Release the Side button when the Apple logo appears, and give your phone about 30 seconds to reboot. You’ll be asked to enter your Passcode if you have one.
Contents
How do I get my iPhone turned on?
Turn on and set up your iPhone
- Press and hold the side button or Sleep/Wake button (depending on your model) until the Apple logo appears. If iPhone doesn’t turn on, you might need to charge the battery.
- Do one of the following: Tap Set Up Manually, then follow the onscreen setup instructions.
How do I wake up my iPhone 10?
To wake iPhone, do one of the following:
- Press the side button or Sleep/Wake button (depending on your model).
- Raise iPhone. You can turn off Raise to Wake in Settings > Display & Brightness.
- Tap the screen (supported models).
Why is my phone not turning on?
Try plugging your phone into a charger—if the battery is truly drained, it won’t necessarily light up right away. Try leaving it plugged in for 15 to 30 minutes or so before turning it on. If that doesn’t work, you could also have a damaged charger. Try a different cable, power bank, and wall outlet.
The Side or Sleep/Wake button is on the upper right, either on the upper right side on most of the current iPhone models. You might also find it on the upper right top of the iPhone. It will be easy to confirm you have the right button was pressing it will turn your display on and off.
Why wont my iPhone wake up?
Enable Tap to Wake
By default, iOS switches on the tap to wake option. But, if by mistake, you have turned it off, then enable it again from the Settings app. Open the iPhone Settings app and navigate to Accessibility > Touch and toggle on tap to wake option. Another useful addition is the ‘Raise to wake’ feature.
How do I enable tap to wake?
How to Turn on and off Tap to Wake Feature on iPhone
- Step 1: Tap the gear icon on your iPhone to launch the Settings app/menu.
- Step 2: Select Accessibility.
- Step 3: Under the ‘Physical and Motor’ section, tap Touch.
- Step 4: Tap the ‘Tap to Wake’ option to toggle it on and activate the feature.
Why did my iPhone turn off and wont turn back on?
If you can’t restart your iPhone, then make sure it’s charged. You might need to replace the Lightning cable and make sure the power source is working properly. If all else fails, plug it into a computer and see if iTunes recognizes the phone. If it does, try to back it up before you get it serviced or repaired.
How do you start a dead phone?
Charge your phone for at least 30 minutes. Press and hold the power button for a few seconds. On your screen, tap Restart , or press and hold the power button for about 30 seconds, until your phone restarts.
How do I turn my phone back on?
Reactivate wireless service
- Go to Account & services > My wireless.
- Scroll and select the device you want to unsuspend > Manage device & features.
- If prompted, select See device options.
- Next to the suspended device, select Reactivate.
- Follow the prompts to reactivate service on your device.
There’s a chance you’ve already found out about the surprise alarm on iOS11 the hard way. It turns out that if you’ve got a new iPhone 8 or 8 Plus, using the iPhone 7’s way of forcing a restart (pressing and holding the power and volume down buttons) will lead to a very loud and very terrifying alarm.
Why is my phone not waking up?
It could be an app problem, or it could be a hardware problem. I would start by uninstalling juice defender and see if your phone does it again. If it does, try other apps you think could be the culprit. If you run out of ideas try a full factory reset.
Why won’t my iPhone turn on when I tap the screen?
Tap to Wake not working properly is a frequent iPhone X issue but newer models are also affected by this problem. To fix it, disable and re-enable Tap to Wake, reset all settings, install the latest updates and have your display checked.
How does iPhone wake up work?
Raise to Wake is an iPhone feature that automatically “wakes up” your iPhone when you pick it up. When you raise your iPhone, the screen turns on, and the lock screen becomes visible. This allows you to easily see notifications, open Control Center, take photos or videos, turn on the flashlight, or view your widgets.
How do I restore a dead iPhone?
Connect your iPhone to iTunes using a lightning-to-USB cable. Press and hold the Sleep/Wake and Volume Down buttons. After 8 seconds, release the Sleep/Wake button but keep holding the Volume Down button. iTunes should detect a device in Recovery Mode, click Restore.
Do I need to call AT&T to activate new iPhone?
Now you’re ready to activate your phone
To activate a new line of service or a replacement device, please go to the AT&T Activation site or call 866.895. 1099. Important Message: Phone service must be activated within 14 days of shipment or service may be canceled or interrupted to protect your information.
Why did T Mobile suspended my account?
Anytime your account is past due, your service may be partially suspended. If the balance on your account remains unpaid, a full suspension may occur. A $20 account restoration fee will be charged per line plus taxes, due at time of restoration, if your account is partially or fully suspended.