To disable the startup sound, you have to go into the system’s BIOS, by pressing the F2 key as soon as the Predator logo appears onscreen during startup. Once in the BIOS, navigate using the arrow keys to the POST Animation & Sound option and press enter. Select ‘Disabled’ and press enter again.
Contents
Why is my predator Helios 300 beeping?
Three beeps that repeat after a pause and occur when you power on your computer indicate a problem with the system memory. Try pulling out and reinserting RAM modules. The doesn’t occur when my computer powers on, they occur while the computer is already booted and working.
How do I turn the volume down on my Acer Predator?
Hi, Click speaker icon in Taskbar and use the slider to increase/reduce volume.
- Press F12 to access the Acer boot menu.
- Go to the Main menu tab by pressing the right arrow button.
- Press the down arrow to select F12 Boot Menu.
- Press Enter to change the status from Disabled to Enabled.
How do I reset my Acer Predator Helios 300?
Best Answer
- Press and hold the Power key for 5 seconds to power the system off completely.
- Press the Power key to turn on the computer.
- Press the Alt and F10 keys at the same time when the Acer logo appears on the screen.
- Select Troubleshoot.
Why is my Acer laptop making a beeping noise?
When the system processor or Random Access Memory (RAM), or hard disk is not working properly, it will give the system alert using the beep sound. I would recommend you to check if the RAM and the hard disk are working properly. You can also change the Windows Sound scheme as “None” and check for the issue.
What happens if your laptop starts beeping?
On startup, computers perform a Power-on Self Test, commonly referred to as a POST.However, if nothing displays on the screen, the computer might use sounds (that is, beep codes) to tell you what is wrong. Many of these errors indicate hardware problems that a service technician should fix.
How do I turn off the sound on my Acer monitor?
To do this. Go to control panel > Click on sound > under playback devices click on set defaults > post this select the device that you want and set that to defaults.
How do I turn the sound off on my Acer monitor?
1-3 of 3 Answers
- Push the button, thats next to the power button..
- You would do this in the monitor On Screen Display settings, which you can enter by pressing the menu button located at the bottom right of the screen bezel.
- The speakers can be turned off through your audio settings on your computer.
Can you turn off monitor speakers?
Turn off monitor speakers from the Sound properties of the Control Panel. Disable the monitor speakers from the Sound properties of your computer system if your monitor speakers are still producing sound after attaching your external speakers.
How do I fix my Acer laptop startup?
How to Restore Windows on my Acer Computer Using Alt + F10 on…
- Press and hold the Power key for 5 seconds to power the system off completely.
- Press the Power key to turn on the computer.
- Press the Alt and F10 keys at the same time when the Acer logo appears on the screen.
- Select Troubleshoot.
- Click Reset your PC.
The F12 Boot Menu allows you to choose which device that you would like to boot the computer’s Operating System from by pressing the F12 key during the computer’s Power On Self Test, or POST process. Some notebook and netbook models have the F12 Boot Menu disabled by default.
How do I reset my Predator desktop?
Questions about factory resetting an Acer Predator G3-710
- Go to Settings.
- Go to Update and Security.
- Select Recovery.
- Click Reset your PC.
- Click Next, then select Just remove my files.
- Click Reset to begin the recovery.
How do I reset my Predator laptop?
Unplug AC power adapter. Locate the battery reset pinhole on the bottom of the computer. Insert a small paperclip in the battery reset pinhole. Hold the reset button for 4 seconds.
How do I reinstall Windows 10 on my Acer Predator Helios 300?
If you can boot into Windows 10, open the new Settings app (the cog icon in the Start menu), then click on Update & Security. Click on Recovery, and then you can use the ‘Reset this PC’ option.
How do I fix 4 beeps on startup?
4 Short Beeps
Start by reseating the RAM and then replacing it if that doesn’t work. Next, assuming those ideas have failed, reseat any expansion cards and then replace any that seem to be the culprit. Replace the motherboard as a last option.
What does 4 beeps mean on startup?
Some number of short beeps that are sounded by the BIOS upon startup when a memory, cache or processor error is encountered.3 Beeps – Memory Error (first 64KB)Reseat/replace memory. 4 Beeps – Timer FailureTroubleshoot motherboard. 5 Beeps – Processor FailureTroubleshoot CPU, motherboard.
Why is my Acer laptop beeping and not turning on?
The beep is from the bios going past checks and on to start the operating system on the hard drive which is dead, or you have just enough power to start but drops off when trying to use more current.
How do I make my laptop stop beeping?
1] Disable System Beep via Control Panel
Under Sound, click on Change system sounds. Now under the Sounds tab, browse to and select Default Beep. Now towards the bottom of the Sound properties windows, you will see a drop-down menu for Sounds. Select None and click on Apply/OK.
Why is my laptop making a beeping noise when I turn it on?
One long, continuous beep generally means that there is a hardware problem – often memory related – that can prevent your computer from starting up at all.In a worst-case scenario, your computer is experiencing a major hardware malfunction that will require repair or replacement.
Why does my computer keep making a pinging noise?
Diagnose Chiming Noise
More often than not, the chime sound plays when a peripheral device is connected or disconnected from your computer. A malfunctioning or incompatible keyboard or mouse, for example, or any device that turns itself on and off, can cause your computer to play the chime sound.