Using a micro-USB cable, connect the base stations to one of your computer’s USB ports one at time. While pressing the Channel button at the back of the base station, plug in the base station’s power adapter. Once the base station is detected by the SteamVR app, the firmware update will start automatically.
Contents
How do I connect steam base stations?
Place your base stations at opposite corners of your play area, pointing toward its center. In general, higher up is better, though be sure to select a stable surface when placing them. Plug each base station into an outlet and remove its protective film.
How do you set up a base station?
Base Stations should be aimed and angled toward the center of the play area. In the ideal setup, Base Stations should be above head height (at least 6.5 feet / 2 meters), angled down by 30-45 degrees, positioned no more than 16 feet / 5 meters apart, and place opposite one another in separate corners of the play area.
DO base stations need Bluetooth?
The SteamVR app on your computer communicates with the base stations through Bluetooth.You just need to connect it to your computer’s USB port and plug in its power adapter. If you’re using VIVE Pro, you will also need to power on its link box.
Why are my base stations not detected?
Turn the base station off and on again. Make sure that you’ve installed your base stations correctly.If the base stations have trouble wirelessly syncing with each other, there might be an obstruction in your play area. Check if using the sync cable would solve your issue.
How does a base station work?
A base station connects the call in to the fixed line network. Depending on the type of call, it will be directed to either another mobile phone or to a fixed line phone. A base station is made up of antennas connected by cable to electronic (radio) equipment usually housed in a room or ‘shelter’.
What is Valve base station?
Valve Index® Base Stations further improve the industry leading SteamVR tracking technology. Fixed lasers sweep 100 times a second to track photonic sensors on the headset and controllers. This ensures the highest resolution (sub-millimeter) experiences across all postures and actions without fear of occlusion.
How do I turn on my base station Bluetooth?
Bluetooth can be enabled/disabled in SteamVR from Settings > General > Enable Bluetooth communication. On the same page, there is a button for installing Bluetooth drivers. If your base stations are not utilizing power management settings or cannot enter standby, you might need to re-install the Bluetooth driver.
How do I pair my base station with Bluetooth?
From your computer, open the SteamVR app. Click > Devices > Bluetooth Settings > Enable Bluetooth . Note: If the Bluetooth driver for the link box needs to be updated, click Update Bluetooth Driver. After installing the Bluetooth driver, restart the computer and relaunch the SteamVR app.
Is Base Station 2.0 wireless?
Now with wide-area tracking, Base Station 2.0 powers the presence and immersion of room-scale virtual reality by helping VIVE Pro series or Cosmos Elite headsets and controllers track their exact locations. Features wireless syncing.
How do you identify a base station?
How can I check which base stations are currently in use?
- From your computer, open the SteamVR app.
- Do one of the following: Click , and then select Developer > Developer Settings > View Room Overview. In the window that opens, the base stations that are tracked by the headset are displayed.
How do I reset my Vive base station?
Steam VR: Base Station Troubleshooting
- Unplug the power to the Base station.
- Wait 5 seconds.
- Plug the power back into the Base station.
- This will reset the Base station.
Do Vive base stations need to see each other?
In general, you don’t need to connect your base stations to each other with the sync cable.
Can you use 1.0 and 2.0 base stations together?
No, they are not compatible.
HOW DO base stations work VR?
Base Stations perform this function by constantly flooding the room with a non-visible light.Multiple Base Stations (2 for SteamVR) allow the tracked devices to figure out where they are in the 3D space. Each Base Station contains an IR beacon called Sync Blinker and 2 laser emitters that spin rapidly.
Do you need base stations for VR?
Yes, because without base stations tracking the Vive headset won’t work. And even if you hacked it to work without the Lighthouse stations, you would just obtain a tethered Gear VR (a 3DOF headset) and it is a terrible idea.
Do Index base stations need USB?
Index Base Station quick question. On the back it has power and some sort of USB input.The USB is useful only if you need to update firmware AND you have problems with Bluetooth. It’s mainly for recovery things, so no need to plug it to anywhere.
Is Vive valve better than index?
The Valve Index tops the field in most respects. With dual displays canted at 5-degrees, it’s offering a 130-degree field of view with hardware IPD adjustment.While that resolution matches the Vive Pro’s, Valve is using LCD panels that have more subpixels than typical pentile OLED displays, making for clearer imagery.
Does Valve index need to be connected to PC?
Oculus Quest 2 vs Valve Index: Design
Completely wireless and with no need to plug into a PC in order to work, it’s ready to go out of the box.
What is WIFI base station?
In the area of wireless computer networking, a base station is a radio receiver/transmitter that serves as the hub of the local wireless network, and may also be the gateway between a wired network and the wireless network. It typically consists of a low-power transmitter and wireless router.
What is a base station GPS?
A base station is a GPS receiver that collects GPS measurements at a known location. Its main components are an antenna, a GPS receiver, and a device to which the GPS data is logged – most often a personal computer.