Contents
What are the correct steps to connect the condenser microphone to the mixer?
CONNECTIONS
- Connect the microphone to the input of phantom power box.
- Connect the output of the phantom power box to the microphone port of the GO:MIXER.
- Connect the tagged end of the supplied USB cable to the GO:MIXER and the other end to the iPhone or Android device.
Should I hang my condenser mic upside down?
The rationale behind hanging a mic upside down comes from tube mics. The heat rising from the tube can cause the diaphragm to change temperature over time, which will change the sound of the mic. Placing the tube above the capsule will let the heat rise without passing over the diaphragm.
Can you plug a condenser mic into a mixer?
Yes, you can! Condenser mics use XLR cables as well, but require phantom power.
Is Blue Yeti a condenser mic?
Yeti is a side-address condenser microphone, so you can capture the best sound by going face-to-face with it. The microphone can also be folded down for easy portability, or removed completely from its base for mounting directly on a mic stand or Radius II shockmount.
How far away from the mic should you be when recording?
between 2 and 12 inches
Your best position will be somewhere between 2 and 12 inches from the face of your microphone. You should also place a pop screen filter about 1 to 2 inches from the mic and apply additional measures in your recording space and mix, as needed, based on your choice of distance.
Where do I place my mic?
Microphone placement
- Place the microphone element to the side of your mouth to avoid noise from breathing.
- Keep the microphone element about an inch from the side of your mouth, but not touching it.
- Make sure the front of the microphone points toward your mouth.
- Position the headset consistently every time you use it.
Are condenser mics good for vocals?
Condenser microphones are best used to capture vocals and high frequencies. They are also the preferred type of microphone for most studio applications.Because of the thin diaphragm and increased sensitivity, condenser mics are often used to pick up delicate sounds. They also need a power source.
Can I sing live with condenser microphone?
The short answer is, I like the sound better, and I think when designed right condensers can be as good for live use as any mic out there.Both are entirely controlled by the frequency response and polar pattern (directionality) of the mic, and especially the polar pattern across the frequency response.
Can you perform with a condenser mic?
We can then capture a much wider range of frequencies, including quieter, more delicate sounds. If you are working with a particularly expressive singer, condensers are simply perfect at capturing the subtleties of his or her performance. They also capture higher frequencies quite well.
Do you need a mixer for a condenser microphone?
Although there’s no way to use a condenser mic without phantom power, you can use a condenser mic without an audio interface, or mixing board, straight to your computer. To do that you need you need an XLR to USB pre amp, such as the MXL Mic Mate Pro.
How does condenser mic work?
Condenser microphones operate on an electrostatic principle, using charged metal plates to help generate sound.When a sound wave hits the diaphragm, the distance between the two plates changes which produces a change in an electrical characteristic called capacitance.
Why is my condenser mic not working?
The problem could be with the phantom power supply, the interface or the mic. Some condenser mic’s will accept phantom power and there is a diode in the circuit to keep the polarity of the voltage correct. The problem could arise if the mic, cable or power supply are mis-wired or shorted.
Are condenser mics good?
Condenser microphones, therefore, offer superior sound quality. Of all microphone types, condensers have the widest frequency response and the best transient response (transients are fast bursts of energy, e.g. the attack of a drum or the “pick” of an acoustic guitar).
Does a condenser microphone need a power source?
Put simply, condenser microphones have active electronics that need an external power source, while dynamic mics are passive and therefore do not need phantom power. Because of the way condenser mics work, their output is very high impedance, and therefore requires a powered circuit to reduce that impedance.
Can I connect condenser mic to amplifier?
You can connect condenser MIC with any amplifier circuit as given below diagram . This circuit will work very well with any type of Audio amplifier. Use only 3-5v for condenser MIC for best result. Audio amplifier circuit need 6-24v as per amplifier specification.
Does mic need a battery?
Wireless mics will need batteries to power the wireless transmitter and oftentimes the mic preamp/impedance converter (often with a battery supplied DC bias). Studio mics that have an option for battery power but will also work with phantom power.
Why the Blue Yeti is bad?
The Blue Yeti is heavy, large, and cannot easily be mounted on a boom arm, which is necessary to move it close enough to your mouth as you record. Most people make the mistake of leaving the Yeti on its stand positioned on their desk, 1-2 feet from their mouth – instead of having it inches away from their mouth.
Which is better condenser or dynamic mic?
The difference between a dynamic and a condenser microphone is a dynamic microphone is better for capturing loud, strong sounds (drums or loud vocals), particularly in a live setting, whereas a condenser microphone is used to capture more delicate sounds and higher frequencies (studio vocals for example), particularly
How do I stop my mic from picking up background noise?
If are using a noise-canceling microphone, make sure it is positioned close to the mouth, approximately 2 centimeters or less than 1 inch away from the mouth. This filters out unwanted background noise, so it is important that you position it correctly to avoid audio issues.
Is it better to record vocals sitting or standing?
Standing is the best position to record vocals in, allowing full opening of the throat and full movement of the diaphragm. However, the singer should sit or stand according to which position they feel most comfortable in. The position that gives the best performance is best.