A typical key is a small piece of metal consisting of two parts: the bit or blade, which slides into the keyway of the lock and distinguishes between different keys, and the bow, which is left protruding so that torque can be applied by the user.
Contents
What are the parts of an old key called?
Antique keys are commonly referred to as bit or barrel keys, the former having a solid shank and the latter being hollow. Many people mistakenly call all old keys “skeleton” keys. But a skeleton key is a specific type of bit or barrel key designed to pass the wards of many different locks.
What is the jagged part of a key called?
Shear line: The straight line going through the middle of the lock is the shear line. When the pins line up, the shear line creates the space needed for the lock to turn. Key notches: The jagged edge of the key has notches designed to match the pins inside the cylinder.
What are the grooves on a key called?
Bullet or Bulleted – 1. In a key, bullets are the longitudinal grooves or projections or both on a key bit requiring a keyhole formed to suit, 2. In a lock, they are the corresponding grooves or projections or both at the keyhole, designed to prevent the entry of a key which is not properly shaped.
What is the top of a key?
The top of the key is the space that is just in front of the three-point line and just past the free throw line. This is a popular shooting spot, so it’s common in zone defenses to have a player cover the top of the key.
What are the parts of a skeleton key called?
Skeleton Keys are bit and barrel keys used to open locks on fine furniture. There are three parts of a skeleton key: the bow, the barrel, and the bit.
Are skeleton keys illegal?
In order to prevent skeleton keys from allowing illegal entry, lock manufactures began to add wards around the outside of the lock as well as in the center. This prevented the successful use of skeleton keys. Skeleton keys of this sort are no longer in common usage, other than in furniture such as china cabinets.
What is the hole in a key called?
the keyway
Keyhole The hole into which the key enters to operate the lock or latch. It is often referred to as the keyway, particularly in a cylinder mechanism.
What is the plastic part of a key called?
A keycap is a small cover of plastic, metal, or other material placed over the keyswitch of a computer keyboard. Keycaps are often illustrated to indicate the key function or alphanumeric character they correspond to.
What are key teeth called?
Canine (cuspid)
Both the maxillary and mandibular canines are called the “cornerstone” of the mouth because they are all located three teeth away from the midline, and separate the premolars from the incisors.
What are the parts of a lock?
Parts of a door lock
- Trim: Sometimes called a rose, the trim is a decorative plate attached to the door under the knob or lever.
- Deadbolt:
- Escutcheon:
- Faceplate.
- Backplate:
- Latch bolt:
- Spindle:
- Strike plate:
What is a ward key?
A warded lock (also called a ward lock) is a type of lock that uses a set of obstructions, or wards, to prevent the lock from opening unless the correct key is inserted. The correct key has notches or slots corresponding to the obstructions in the lock, allowing it to rotate freely inside the lock.
What are the rows on the keyboard?
The top row keys are the ten keys found above the home row keys on a QWERTY US keyboard. The top row keys include the Q, W, E, R, and T keys for the left hand and Y, U, I, O, and P keys for the right hand. In the picture below, the hands are on the home row keys, and the top row keys are above the home row keys.
What are the types of keys?
There are broadly seven types of keys in DBMS:
- Primary Key.
- Candidate Key.
- Super Key.
- Foreign Key.
- Composite Key.
- Alternate Key.
- Unique Key.
What are the four rows on the keyboard?
(in touch typing) the row on a typewriter or computer keyboard that contains the keys (home keys ) to which four fingers of each hand return as a base, on a QWERTY keyboard being A, S, D, and F for the left hand and J, K, L, and the semicolon for the right.
How would you describe the skeleton key?
A skeleton key (also known in North America as a passkey) is a type of master key in which the serrated edge has been removed in such a way that it can open numerous locks, most commonly the warded lock. The term derives from the fact that the key has been reduced to its essential parts.
How do you identify a key?
To make it easy to find the most used keys on your key ring:
- Color Code Key Head: Paint both sides of the head of the key with brightly colored nail polish.
- File Notch in Key Head: Use a triangular file to cut a small (1/8″ deep) notch in the head of your most used key, so you can find it by feel, even in the dark.
Is there a key that can open any lock?
Locks come in all sorts of shapes and sizes, but have common ground in how they work.A bump key can open any lock that it fits into. It’s helpful to have in your pocket if you ever lose your keys, because it can open your door lock and your deadbolt, even if they normally require seperate keys.
What’s a 999 key?
Bump keys are specially cut keys that can bypass the security mechanisms built into traditional pin and tumbler locks. Bump keys are also referred to as “999 keys” because all of their ridges are cut to the maximum depth (999) in a key-making machine.
Do police have master keys?
No, the police don’t have “master keys” to anyone’s home, unless that person leaves such a key in their possession or someone who knows that person provides them with such a key.Or someone in your family may left a key in the door’s lock and the police simply used it to open the door.
What key will not unlock anything?
the first answer is donkey and monkey as in their name there are keys but they can’t open the door . the second answer is water ,, as it can run fast and fast but it can’t walk .