The reasons why your wireless mouse might not be working is because it has a low battery, it isn’t connected to the right port, the USB drivers are not properly installed, or the surface on which you are using the mouse is not optimized for the mouse.
https://www.youtube.com/watch?v=Xn3Jx8MBHpA
Contents
Why can’t I get my Logitech mouse to work?
To fix Logitech wireless mouse not working issue, you can try to connect the unifying receiver to the computer via another USB port. Unplug the receiver from the USB port and plug it to another USB port. Then check to see if the problem is resolved. Keep doing this until you’ve tried all USB ports on your computer.
How do I fix my Logitech mouse not being detected?
These solutions may seem simple and obvious, but try them and we can assure you that most times simple solutions work perfectly.
- Fix 1: Verify Hardware Status.
- Fix 2: Verify Connectivity Status.
- Fix 3: Update your Mouse Drivers.
- Fix 4: Reinstall Logitech Gaming Software.
Why is my wireless mouse suddenly not working?
Sometimes the receiver gets out of sync with the wireless devices, causing them to stop working. Resyncing the setup is fairly easy. There is usually a Connect button somewhere on the USB receiver.Then press the Connect button on the keyboard and/or mouse and the flashing light on the USB receiver should stop.
Why is Logitech wired mouse not working?
The mouse driver might be removing, outdated, incompatible with the new system, or driver conflicts occur. Most often, you can resolve the problem by updating the drivers. You can go to Device Manager to check if there is problem with Logitech Mouse driver.
How do I get my Logitech mouse to work?
How to Pair a Logitech Wireless Mouse With Your PC
- The mouse comes with a small Bluetooth receiver.
- The mouse will connect automatically.
- Slide the power switch on the body of the mouse to turn it on.
- Move the mouse around the screen and check if mouse speed and sensitivity are optimized for your use.
How do I reprogram my Logitech mouse?
To do this on a Windows 10 PC, go to Settings > Devices > Add Bluetooth. On your mouse, press the Connect button; the device should appear as an available Bluetooth device on your screen. Select it to complete the pairing process and use your mouse.
How do I get Windows 10 to recognize my Logitech mouse?
Go into the Device Manager, choose the Mouse device, on Driver tab see if Roll back is available and try that first. If not then try Uninstall, restart PC using keyboard to Ctrl Alt Del, on blue screen tab to Power Icon in bottom right, press Enter, arrow down to Restart, press Enter to restart to reinstall the driver.
Why is my Logitech Bluetooth mouse not working?
The reasons why your wireless mouse might not be working is because it has a low battery, it isn’t connected to the right port, the USB drivers are not properly installed, or the surface on which you are using the mouse is not optimized for the mouse.
Why is my mouse not working?
A: In most cases, when a mouse and/or keyboard become unresponsive, one of two things are to blame: (1) The batteries in the actual mouse and/or keyboard are dead (or are dying) and need to be replaced; or (2) the drivers for either or both devices need to be updated.
How do I reset my Logitech wireless mouse?
Reset Button on Your Logitech Wireless Mouse
There are multiple ways to accomplish this – the easiest being turning the power off and back on again. If there happens to be a reset button on the mouse, you can hold it for a few seconds and see what happens.
How do I unfreeze my wireless mouse?
Start by tapping the “F7,” “F8” or “F9” keys at the top of your keyboard while releasing the “Fn” key at the bottom of your laptop, near the space bar. If it doesn’t work, check your hardware (USB ports and mouse) for any flaw. If the situation persists, or go deeper into the devices’ settings.
How do I connect my Logitech wireless mouse?
Go to Settings and Networks and select Bluetooth. 2. Select name of the Logitech device you want to connect from the list of available devices and click Pair.
Why a wired mouse stops working?
It’s possible the usb port (which supplies power to the mouse as well as the data connection) could have malfunctioned. If testing in other usb ports and other usb devices work fine in the port your mouse was plugged into then you’ll probably need a new mouse.
How do I get my wired mouse to work?
Try these steps, organized in order of most-common and easiest to most intensive.
- Inspect the mouse for hardware damage.
- Clean the mouse.
- Replace the batteries.
- Try a different USB port.
- Connect the mouse directly to the USB port.
- Use the mouse on an appropriate surface.
- Update the driver.
Why is my wired mouse not moving?
Check that the battery of the mouse is charged. Make sure that the receiver (dongle) is firmly plugged in to the computer. If your mouse and receiver can operate on different radio channels, make sure that they are both set to the same channel.
Why is my Logitech mouse not connecting to GHUB?
Unplug the device and plug it back into a different USB port. It should re-enumerate and be detected in G HUB.G HUB should then download the driver for your device.
How do you reset your mouse?
To reset a computer mouse:
- Unplug the mouse.
- With the mouse unplugged, hold down the left and right mouse buttons.
- While holding down the mouse buttons, plug the mouse back into the computer.
- After around 5 seconds, release the buttons. You will see an LED flash if it resets successfully.
How do I sync my Logitech wireless mouse with a non Unifying receiver?
It’s quite simple really. Just turn off your mouse (or take out the batteries) and then turn the mouse back on. Voila, the mouse should now be paired with the receiver.
How do I connect my Logitech wireless mouse without a receiver?
How to connect the Bluetooth device to the computer
- Press and hold the Connect button on the bottom of the mouse.
- On the computer, open the Bluetooth software.
- Click the Devices tab, and then click Add.
- Follow the instructions that appear on the screen.
How do I pair my Logitech Performance MX mouse?
To connect with the pre-paired Unifying receiver
- On the mouse, press the Easy-Switch button to select a channel.
- Press the Connect button.
- On the computer, plug the Unifying receiver into a USB port.
- Upon pairing, the selected channel light on your mouse stops blinking and remains steady for 5 seconds.