Contents
How do I manually move a printer carriage?
Insert your hand into the Ink Cartridge Access Area and then move the Carriage manually. Move the Carriage to the left side if it’s stuck on the right, and vice versa. Also, move the Carriage to the right if it’s held in the center.
How do you move a printer cartridge?
Removing and Installing Ink Cartridges
- Turn on your product.
- Lift up the scanner unit.
- Press the stop button.
- Squeeze the tab on the cartridge and lift the cartridge straight up to remove it.
- Before opening the new cartridge package, shake it gently four or five times.
- Remove the cartridge from the package.
How do you manually move a printer cartridge Canon?
Replace or reseat ink cartridges
- Turn the printer on and open the front cover (C).
- The paper output tray (D) opens.
- Remove any paper in the cassette.
- Open the paper output cover.
- The cartridge holder (E) moves to the replacement position.
- Push down on the cartridge until it clicks.
- Remove the cartridge.
How do you get a stuck ink cartridge out of a printer?
If the ink cartridges are stuck and can’t be removed, go to step 1.
- Open the ink cartridge cover located on the front of the machine on the right-hand side.
- Press the lock release lever(s) to release the affected ink cartridge(s).
- Try to remove the affected ink cartridge(s) from the machine.
What does Carriage Jam mean on a printer?
A carriage jam may indicate the carriage is blocked from moving of that there is a problem with the position sensor for the carriage. Let’s start by performing a Hard reset on the printer and make sure that the printer is connected directly to the wall outlet and not to the surge protector.
What does cartridge Jam mean?
The message ‘Carriage Jam’ or ‘Carriage Blocked‘ displays on the product control panel. The carriage assembly, which holds the ink cartridges, stalls against the left side of the product. A paper jam might have occurred previously. The following symptoms might also occur: The product will not print.
How do you reset an HP ink cartridge?
In the Windows operating system:
- Open Devices and Printers.
- Select the active printer.
- Click on HP Printer System.
- Click the Maintain Your Printer tab.
- Click the HP Cartridge Protection tab.
- Click off the Disable HP Cartridge Protection button.
- Click ok to save settings.
How do you get a stuck ink cartridge out of a Canon Pixma?
Make sure the ink tank is square in the print head, then push on the top of the cartridge until you hear a click. You should then be able to remove the cartridge.
How do I get my Canon printer to recognize refilled cartridges?
If your Canon printer isn’t recognising a compatible ink cartridge, this may be because the data on the cartridge chip is stamped with an empty status before it was remanufactured. Hold down the stop / cancel button for 5 seconds to bypass the ‘ink has run out’ message and your cartridge should work.
How do I force my Canon printer to refill a cartridge?
Open the cartridge door and hold down the power button. Reconnect the power cables while still holding down the power button. Close the cartridge door and release the power button. The ink cartridge is now reset.
How do you clear jam in a cartridge?
Solution three: Clear a paper jam in the cartridge area
- Lift the scanner assembly.
- With the printer turned on, disconnect the power cord from the rear of the printer, and then open the top cover.
- Remove the toner cartridge.
- Remove any jammed paper from the cartridge area.
- Reinsert the toner cartridge.
How do I fix my HP printer cartridge?
To override HP ink cartridge error, remove and reinstall the indicated cartridge 2-3 times until it firmly seats in the slot. Then turn off the printer and remove all cartridges. Gently, with a dry lint-free cloth, wipe the contacts on the cartridge and carriage to remove any dirt or residue.