72 to 96 inches long.
Dining table sizes for eight can range from 72 to 96 inches long by 36 to 43 inches wide (6–8ft x 3ft–3’6″; 183–244cm x 91–110cm), with the lower measurements also a comfortable fit for six seats and the higher measurements suitable to squeeze 10 people.
Contents
How long is a table that seats 8?
A table that seats four should be about 48″ long. To seat four to six people, look for a table that is at least 60″ long. For six to eight guests, your table should be at least 78″ long. The rule of thumb is to allow 24″ of space per seat at your dining table.
How long is a rectangle table that seats 8?
A 60” to 72” long rectangular table can seat up to 6 adults. An 84” to 96” long rectangular table can seat up to 8 adults. A 108” to 120” long rectangular table can seat up to 10 adults.
How long is a 10 seater table?
96 inches long
Tables are typically 36 inches wide, says Home Stratosphere. If the chosen table is less than this, the end may not be wide enough for a setting, in which case the required length must adjusted. To seat 10 people, with four on each side of the rectangle, the table must be 96 inches long.
How long is a typical dining room table?
Most dining tables are made according to standard measurements. The standard width is 36-40 inches while standard height is 29-31 inches.
Standard Dining Table Sizes.
| Seats | Length |
|---|---|
| 10-12 | 92-110″ |
How long should a table runner be for a 8ft table?
108″
The length of the table runner needed for an 8-foot table should be a minimum of 108″. This allows for coverage of the table and an overhang of 6″ on each side. A centerpiece runner should be one-third of the table length, which equals 32″.
What is length of a table?
-A table’s LENGTH are the longest sides.The rectangular table pictured is a 6 foot banquet table. So, the length of the table is 72 inches. -A table’s WIDTH are the shorter sides.
How many does a 90 inch table seat?
8 people
A 90″ rectangular dining table can seat up to 8 people comfortably. A 108″ rectangular dining table can seat up to 10 people comfortably.
How many does a 72 inch table seat?
8 people
A good starting size for a rectangular table is 60″ x 30″, with that size, you can accommodate 6 guests comfortably, and a few more in a pinch. Stretching the length to 72″ will allow you to comfortably seat 8 people, and increasing the size to 72″ x 48″ will allow you to comfortably seat 10.
How long is a dining table that seats 6?
For Rectangular Tables: Most people find that a 6 foot long (72 inch) dining table is perfect for seating 6 comfortably.
How long is a dining table that seats 12?
You need about 1 1/2 to 2 feet to seat a diner comfortably, so a table about 9-10 feet long would work for 12. Pedestal tables can accommodate guests better since there’s no leg to get in the way.
How long is a table that seats 20?
So if you’re looking for a large rectangular table to seat 20, you can start by putting 2 folks on the ends of the table, then count 2 people each 2′ to seat the remaining 18 — or a total table length of 18′ (216″).
How big of a table can I fit in a 10×10 room?
There is adequate space for seating and a walkway behind the diners with a clearance of 36 to 42 inches from table edge to a wall or other furniture. A table 36 to 42 inches wide and 60 to 72 inches long can be accommodated in a dining room.
Is 32 inches too high for a dining table?
The standard dining room table height is 28 to 32 inches tall. This height generally feels a bit more formal, so it’s perfect for spaces you’re trying to give that sophisticated, grown up feel.
What is the standard size of study table?
The standard size for a study desk/table is 26” – 30”.
What is standard table height?
between 28 and 30 inches
Standard Height Dining
The table height is typically between 28 and 30 inches. The chair, stool or bench height is 18 to 23 inches.
How long should a table runner be for a 7 foot table?
Most table runners come in standard widths such as 10, 12, 13, 14 or 15 inches and standard lengths such as 54, 72, 90 and 108 inches. If you have a dining table that is 84 inches long and 42 inches wide (7 feet by 3.5 feet), you would need a table runner with the dimensions of 14 inches by 108 inches.
How wide is an 8 foot folding table?
96 in. x 30 in
Lifetime 8-Foot Commercial Folding Table – Features a 96 in. x 30 in.
How long should table runners hang?
The length of your table runner is up to you. Ideally, it should hang at least six inches over each end of your table, but shouldn’t hang further than your tablecloth. For example, if your table is 60 inches long, your table runner should be at least 72 inches long, allowing for six inches at either end of the table.
What size tablecloth do you need for an 8 foot table?
What size tablecloth do I need for a 8 foot table? For a lap length tablecloth on a 8′ banquet table you need a 60″ x 120″ linen. For a floor length tablecloth, you need a 90″ x 156″ linen.
How do you measure a table size?
If you have a Round table, you should measure straight across the middle. If you have a Square table, just measure one of the sides, end to end. (All sides on a square are equal.) If you have a Rectangle table, measure the length from end to end and width from end to end.