between 12- to 16-inches wide.
Home bar tops are usually between 12- to 16-inches wide. Commercial bar tops vary from 20- to 28-inches in width, including a drink rail (or trough) on the server side of the bar. Drink rails are typically 3/4-inch deep by 4-inches wide. The minimum bar top thickness is 1 3/4-inches utilizing a flat grain wood.
Contents
How deep should a bar top be?
18 inches deep
Not Too Deep
Typically a bar top that is a minimum of 18 inches deep works well, but you can extend this to 20 to 24 inches to allow more space for larger sinks and fixtures.
What are the dimensions of a bar?
When coming up with the design for your bar, keep in mind that the average home bar is 42 inches high and 24 inches deep. Of course, you can customize your bar’s size to fit the area that you have available and your preferences.
How much overhang should a bar top have?
A typical overhang for a comfortable seating area should be around 25-30cm (10-12”), this should leave enough knee room and adequate space between the countertop edge and the person seated. Therefore, as the depth of the overhang increases, so does the comfort and usability of the bar.
How deep should a home bar be?
The dimensions of a typical bar are fairly standard. A finished bar height surface that works well for the average height person is 42 inches. The bar top should be at least 18 inches deep. 20 to 24 inches is better if you have the room.
How wide should a counter bar be?
Answer: 16-20+ inches. However, it does depend to some degree on who you ask. While some will offer the 16-20 inch measurement, you may find other suggestions.
How wide should a kitchen bar counter be?
Countertop bars are 36 inches, and bartops are 42 inches. Forty-two inches is the most common, but different heights may suit your kitchen (or those who use it most) better. Twenty-four inches deep leaves enough room for eating, without being too difficult to reach across.
How long is a bar for 4 stools?
Measure the usable length of the counter top or bar. Divide that by 21″ per stool for a small stool and 24″ for larger stools with swivels and arms. Some very large stools may require more than 24″. Looks like 7 feet will be a bit tight for 4 bar stools, 8 feet would be more comfortable.
How much space is needed for a bar?
Allow at least 36 inches between the bar and the back bar or wall. This is a bare minimum to allow a single bartender space. If constructing a large bar, where it is possible more than one person will be behind the bar, allow more space. The builder should also plan the electrical outlets and lighting for the bar.
How deep is a bar?
Bar counter depth can range from 16 to 20 inches deep, depending on your preference. This is also going to depend on the type of seating you choose and what kind of overhang is recommended so that your guests can sit comfortably at the bar with enough leg room.
How thick should my countertop be?
The industry standard thickness for kitchen, bathroom, and other countertop surfaces in natural stone is 1.25 inches. This thickness provides the strength and stability required to create an unbroken surface without the need for stabilizing it with a plywood backing.
How wide is a countertop?
Countertop Width Standards
Most homes are fitted with kitchen countertops that measure 25.5 inches in width (from the wall to the edge of the counter), with some measuring up to 28 inches. Standard measurements allow for a 1.5-inch overhang over 24-inch deep base cabinets.
How far can a countertop overhang without support?
Solid Surface countertops can overhang 6 inches without additional support (e.g. plywood decking). 3 cm Quartz (engineered stone) can handle a 14 inch overhangs and 3 cm Granite overhangs should not exceed a 10 inch overhang without additional support.
How long should a bar be for 3 stools?
In order to determine how many stools will fit at your kitchen island, home experts recommend you allow 28 to 30 inches for each seating space, which means you can divide the length of your island’s counter by 30 to to figure out how many stools will comfortably fit.
What is standard counter depth?
While the standard kitchen countertop depth is 25 ½ inches, most kitchen island countertops can go up to 27 or 28 inches deep and over 30 inches deep if it comes with a breakfast bar.
How wide should a bar stool be?
The most common bar stool widths are 15″, 17″, and 21″. However, the seat width of a bar stool also directly impacts how many stools you can fit in your space. Measure the width of your counter or bar and keep this number in mind when you are browsing stools.
How much should a countertop overhang?
The recommended counter overhang also varies with the counter height, with experts suggesting 15 to 18 inches for the lower counter and 12 inches for a raised counter. Whatever height counter you have and whichever kind of seating, allow at least 24 inches of space between each seat for your guests’ comfort.
How long should an island be to seat 3?
The standard length of a 3-seat island is 8′. Standard depth with a sink is 42″.
How much should a bar overhang in a house?
The bar top overhang should be a minimum of 8-1/2” and could be as much as 10” so your knees do not hit the bar front. For our extra tall customers the 10” overhang maybe necessary.
Which part of bar layout is mostly used for storage?
In most bars, the overhead slotted racks are fitted to store the stemware which makes the bar very attractive. The base of the back bar functions as a storage. The base of the back bar functions as a storage space and the part of it may be a refrigerated cabinet.
What are the three 3 parts of the bar?
All the three parts of the bar—front bar, back bar, and under bar—must be functional keeping the requirements of the guests and the bar staff in mind.