DO NOT
- Use abrasive erasers, cleaners, sponges or rags.
- Use a chalkboard eraser.
- Use a wet eraser.
- Use a permanent Marker – Keep them away from your whiteboard.
- Use tape on whiteboards.
Contents
What should you not put on a whiteboard?
Do not use:
- Any standard kitchen or bathroom cleaner, industrial cleaner, or solution containing isopropanol alcohol.
- Coarse or granular cloth like paper towels and toilet paper.
What to use on a whiteboard to clean it?
Using a cloth moistened with whiteboard cleaner is enough to keep a board clean if used every week. Warm soapy water, window cleaner and peroxide all work well too. Be sure to stay away from wax-based cleaners as they leave a pesky film on the whiteboard.
Does rubbing alcohol damage whiteboards?
To put it simply, alcohol destroys the lubricating layer of your dry erase board. Yes, your whiteboard will look spotless, but after continued use, your whiteboard will eventually lose the ability to wipe clean.
Can I use Windex on my whiteboard?
Can you use Windex® to clean a dry erase board? Yes, products such as Windex® are recommended for cleaning a whiteboard. Never use scouring pads or abrasive cleaners, as those can ruin the dry erase surface and allow ink penetration.
How do you stop whiteboard ghosting?
4 TIPS TO PREVENT AND REMOVE WHITEBOARD GHOSTING –
- REMOVE PROTECTIVE FILM, IF ANY. Many mobile whiteboards come with a protective sheet that keeps the board clean till the first usage.
- USE THE DRY ERASE METHOD TO REMOVE STUBBORN MARKS.
- BE CAREFUL WHEN CHOOSING THE CLEANER.
- REGULARLY CLEAN THE BOARD.
Can you use hand sanitizer to clean a whiteboard?
But for hand sanitizer to work effectively to clean whiteboards, they need a much higher concentration of isopropyl alcohol – the 90% to 99% range is best. Apply hand sanitizer directly to the whiteboard, using a soft, clean cloth or paper towel to wipe it over the entire surface of the whiteboard.
Does WD 40 clean whiteboards?
WD-40 (paid link) is the best treatment for clean whiteboards. It held up under multiple erasings and still looked great after over a week. It’s also super easy to apply — spray on, wipe off with a paper towel.
How do you remove stubborn stains from a whiteboard?
Use a fresh dry erase marker to write over top of the stains, covering them completely. Wait a few seconds for the marker to dry. Wipe away all marks with a cloth or felt eraser. The dry erase ink will lift away the permanent ink.
Can you use acetone on a whiteboard?
Never use Acetone (propanone) or ethanol to clean the Whiteboard. Not only is it dangerous from a Health and Safety point of view to your own health but also, the acetone will strip the varnish off the board. the Ethanol will dull the board after about one month of use.
Why do whiteboards stop erasing?
Clean Your Whiteboards Erasers. If you decide to use a felt eraser instead of the recommended microfiber cloths to clean your whiteboard painted wall, be sure to remove all of the built-up marker dust from the eraser beforehand. When whiteboard erasers become overloaded with ink, they can no longer erase efficiently.
Do Magic Erasers ruin whiteboards?
Magic Eraser: By wetting a magic eraser, you are able to clean the whiteboard’s surface while removing stains and ghosting. Used Fabric Softener Sheet: A fabric softener sheet will not scratch the surface of your whiteboard, but can effectively remove dry erase ink that is on the white board for less than 24 hours.
Do Clorox wipes ruin dry erase boards?
Do not use glass cleaner, Clorox® wipes, or all-purpose cleaners as they will damage the whiteboard surface and void the warranty. The surface should be cleaned only with dry erase wipes, liquid board cleaner, or a damp wet cloth. Abrasives or other chemical cleansers should not be used.
Is white board cleaner the same as Windex?
According to SC Johnson Brands, the cleaning solution in all Windex products is safe for use on white boards, and is equal to most white board cleaning liquids. Spray Windex on a clean, lint-free cloth—a microfiber cloth is preferable.
How do you remove marker from a whiteboard?
How to clean a whiteboard with rubbing alcohol
- Put rubbing alcohol on a soft cloth. Using your rubbing alcohol or hand sanitiser, get your clean, soft cloth damp.
- Gently rub away on the marker. Use your damp cloth to gently rub away the permanent marker stain.
- Dry with a soft cloth.
- Repeat until completely removed.
Will dry erase markers come off of glass?
Windows have glass panes and glass on a non-porous surface. We all know that some markers are great for non-porous surfaces. So, you can indeed use dry erase markers on windows and even on glass sliding doors.A fairly wet paper towel can also remove the markers on the glass.
What is Whiteboard Ghosting?
Whiteboard ghosting occurs when dry erase marks are left behind and cannot be erased.
How do you break in a new whiteboard?
The good news is there are a few actions you can take to help achieve a non ghosting whiteboard surface.
- Use high quality markers and cleaning sprays.
- Clean with Smart Sponge.
- Replace your choice of eraser when it gets dirty.
- Use a pro cleaner every so often – note not suitable for daily usage.
What is Eraser ghosting?
Ghosting is when your dry erase marker ink bleeds into the surface of your board. Ghosting can be caused by one of four reasons; it can be cause by dirty erasers, by erasing marker that is still wet, by using the wrong kind of marker or by using the board too frequently.
Can I resurface a whiteboard?
Whiteboard surfaces are made of durable porcelain or vinyl, but over time they become scratched and discolored. Instead of replacing the whiteboard, you can resurface it for much cheaper. Resurfacing is a project that you can do on your own with a few supplies from the local hardware store.
Can you wax a dry erase board?
Apply a generous layer of carnauba wax based auto finish to the white board. I have applied it using the small pad that comes in the car wax package but a cotton cloth can be used as well. Let the wax dry for several days. It will look all yellowish color, particularly if it was put in extra thick.