Which Way To Put Paper In Printer?

Put the side to be printed on face down with the leading edge (top) of the paper at the front of the tray. To print on the second side, put the paper face up, with the leading edge (top) of the paper at the front of the tray.

Contents

Which side of the paper does my printer print on?

This small icon or symbol tells you which side it will print on. When the printers icon has lines on the paper and the top left corner of the icon is folded down to show the other side is clear it will print on the front side of the paper.

Does a printer take paper from the top or bottom?

The printer prints on the bottom side of the top sheet of paper loaded in the paper tray.

Which way does paper go in HP printer?

Lower the output tray. Pull out the tray extender. Load plain white paper into the input tray with the short edge forward and the print side up. Slide the paper width guide inward until it rests against the edge of the paper.

Do you put photo paper in upside down?

Place your photo paper in the tray with the glossy or printable side facing down. Hold the paper by the edges to avoid fingerprints on the glossy surface.

When printing labels which side goes up?

Face up ( the side you want the label to be printed) and adhesive side on down.

How do I print from top to bottom?

1. Set It in Microsoft Word

  1. Open Word, then click Options > Advanced.
  2. Scroll through and come to the Print section on the right.
  3. When you want to reverse print a page, select the Print Pages in Reverse Order check box. Click OK and exit the Options screen.

Where do you put the paper in a HP Deskjet printer 4155?

  1. The paper feeds from the back tray of the HP Deskjet Plus 4155.
  2. unfortunately this is a rear-loaded with a top feed/gravity feed tray.
  3. does it auto feed for copying and how many pages.
  4. Unfortunately it feeds from the back since HP doesn’t make them feed from the front in the bottom anymore.

Which way do you put photo paper in a Canon printer?

Load the paper in the center of the front tray WITH THE PRINT SIDE FACING DOWN. Push the paper stack all the way to the back of the front tray. Always load paper in the portrait orientation (D). Loading paper in the landscape orientation (E) can cause paper jams.

Which way does photo paper go in Epson printer?

Load photo paper, printable side down, against the edge guide as shown. Note: Make sure the paper is loaded against the edge guide and not sticking out from the end of the cassette. Slide the edge guides against the paper, but not too tight. Note: Make sure the paper fits beneath the top edges of the guide.

Why are my labels printing out of alignment?

Misalignment Problem: All your sticky labels are misaligned in the SAME direction by the SAME amount. Fix The Problem: Adjust the page margins of your label template. In Word, click on the “Layout” tab at the top of the page. Click on “Margins” and select “Custom Margins” from the list.

Do Avery labels go face up in printer?

Most labels will just need to be fed with the right side facing up, but you can double check the recommended feed direction by checking your Avery label sheet.

How do I print a sheet of labels with different names?

Create and print a page of different labels

  1. Go to Mailings > Labels.
  2. Select Options.
  3. Select the type of printer you’re using.
  4. Select your label brand in Label products.
  5. Select the label type in Product number.
  6. Select OK.
  7. Select OK in the Labels dialog box.
  8. Type the information you want in each label.

How do I print on both sides of the paper?

Printing on both sides of paper is called duplex printing.
In Word, do the following:

  1. Click the File tab.
  2. Click Print.
  3. Under Settings, click Print One Sided, and then click Manually Print on Both Sides. When you print, Word will prompt you to turn over the stack to feed the pages into the printer again.

How do I change my printer to print first page first?

Reverse

  1. Press the menu button in the top-right corner of the window and press the Print button.
  2. In the General tab of the Print window under Copies, check Reverse. The last page will be printed first, and so on.

Why does my printer print backwards?

In fact, some printers actually output documents in reverse order because of the way they stack the pages in the output tray, so turning off the “reverse pages” setting yields backward documents. If your document pages emerge with the last on top, check your printing settings for an option that inverts page order.

Where does the paper go in HP DeskJet Plus 4100?

HP DeskJet 4100 paper Load-123.hp.com/dj 4100
Open the Input tray, slide the paper width guide towards the input tray edges. Load a stack of paper into the input tray with the printer side facing Up. Slide the paper inside until the slider stops. Pull the Output door and pull out the tray extender.

How do I align my HP DeskJet 4152?

– In the printer software, click Print & Scan. – Click Maintain Your Printer to access the printer toolbox. – Click Align Cartridges on the Device Services tab. The printer prints an alignment page.

How do you load glossy photo paper into a printer?

Load photo paper with the glossy side facing up. Slide the paper guides (D) to align them with both sides of the paper stack, being careful not to push the paper guides too hard against the paper. Always load paper in the portrait orientation (E). Loading paper in the landscape orientation (F) can cause jams.

How do I load a 4×6 photo paper into my Epson printer?

Loading Paper in the Photo Tray

  1. Close the output tray, if necessary.
  2. Open the front cover.
  3. Pull out the paper cassette.
  4. Pinch the tabs on the photo tray edge guides and slide them outward.
  5. Load photo paper, printable side down, in the photo tray as shown.
  6. Slide the left edge guide to the edge of the paper.

What side do you print on matte photo paper?

Matte papers and especially some fine arts ones may be more difficult. Look for the whiter side (if there is one), and usually smoother one (if the paper is not heavily textured). The ink-retaining coating usually makes the print surface “chalkier”.