Power on the computer. Tap the F2 key to enter System Setup when the Dell logo appears. If you have trouble entering Setup using this method, press F2 when the keyboard LEDs first flash. Try not to hold down the F2 key as this can sometimes be interpreted as a stuck key by the computer.
Contents
How can I enter BIOS if F2 key is not working?
If the F2 prompt doesn’t appear on the screen, you might not know when you should press the F2 key.
- Go to Advanced > Boot > Boot Configuration.
- In the Boot Display Config pane: Enable POST Function Hotkeys Displayed. Enable Display F2 to Enter Setup.
- Press F10 to save and exit BIOS.
What are the 4 keys to enter BIOS?
Common keys to enter the BIOS are F1, F2, F10, Delete, Esc, as well as key combinations like Ctrl + Alt + Esc or Ctrl + Alt + Delete, although those are more common on older machines. Also note that a key like F10 might actually launch something else, like the boot menu.
How do I enter BIOS setup mode?
In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.
How do I get into the BIOS on a Dell Inspiron 15?
Entering BIOS setup program
- Turn on (or restart) your computer.
- During POST, when the DELL logo is displayed, watch for the F2 prompt to appear, and then press F2 immediately. NOTE: The F2 prompt indicates that the keyboard is initialized. This prompt can appear very quickly, so you must watch for it, and then press F2.
How do I get into the BIOS on a Dell laptop?
To enter BIOS, you simply need to enter the correct key combination at the correct time.
- Turn on your Dell computer or reboot it.
- Press “F2” when the first screen appears.
- Use your arrow keys to navigate BIOS.
How do I get into BIOS on Dell XPS?
Entering BIOS setup program
- Turn on (or restart) your computer.
- During POST, when the DELL logo is displayed, watch for the F2 prompt to appear, and then press F2 immediately. NOTE: The F2 prompt indicates that the keyboard is initialized. This prompt can appear very quickly, so you must watch for it, and then press F2.
How do I access BIOS utility?
Enter the BIOS Setup Utility by pressing the F2 key while the system is performing the power-on self-test (POST). Tip – Watch the screen for the prompt to press F2. The main BIOS Setup menu screen appears.
What is Dell Inspiron BIOS key?
When your Inspiron boots, look for the “Press F2 for Setup” message to know when to press the “F2” key to access the BIOS. These instructions usually appear at the bottom of the screen immediately after you turn on your computer.
How do I enter BIOS on Windows 10?
To enter BIOS from Windows 10
- Click –> Settings or click New notifications.
- Click Update & security.
- Click Recovery, then Restart now.
- The Options menu will be seen after executing the above procedures.
- Select Advanced options.
- Click UEFI Firmware Settings.
- Choose Restart.
- This displays the BIOS setup utility interface.
How do I access bios from command prompt?
Using the Command Prompt in Windows
- Type CMD in the search box. Select Command Prompt or CMD.
- The Command Prompt window appears. Type wmic bios get smbiosbiosversion and then press Enter. The string of letters and numbers following SMBBIOSBIOSVersion is the BIOS version. Write down the BIOS version number.
Can’t access BIOS setup Windows 10?
Power down the machine, unplug it, wait 10 minutes. Reconnect it then boot the machine again then use the command for loading your BIOS.
Try this :
- Hold down Shift and turn off the system – do not let up until it is all the way off.
- Wait a minute or two.
- Hold down the Bios entry key (such as F2) and power on the system.
How do I get into the BIOS on a Dell Inspiron 11 3000?
Restart the computer and press F12 when the Dell logo is displayed on the screen. Boot to the USB drive from the One Time Boot Menu . Type the BIOS setup program filename and press Enter.
What is BIOS setup Dell?
BIOS also called System Setup is an acronym for Basic Input or Output System.When the computer is turned on, BIOS activates all the basic hardware that is required to boot the operating system including but not limited to: Chipset. Processor and cache. System memory or RAM.
Power the computer on. At the Dell logo screen, tap the F12 function key rapidly. You can see Preparing one-time boot menu that appears in the top-right corner of the screen. At the boot menu, select the device under UEFI BOOT that matches your media type (USB or DVD).
How do I boot from USB on Dell Inspiron?
To boot from USB may require a quick modification of the BIOS settings.
Dell XPS Boot from USB Method 1:
- Turn off the laptop.
- Plug in your USB operating system.
- Turn on the laptop.
- Press F12.
- A boot option screen will appear, select the USB drive to boot.
How do I reset my Dell laptop BIOS?
Turn on the computer. Tap the F2 key several times until Entering Setup appears. Reset the BIOS to factory defaults.
The method to reset the BIOS varies between different computers:
- Click the Load defaults button.
- Or, press the F9 key to load default settings.
- Or, press the Alt + F key to load default settings.
How do I reset my BIOS to default?
Reset the BIOS to Default Settings (BIOS)
- Access the BIOS Setup utility. See Accessing BIOS.
- Press the F9 key to automatically load the factory default settings.
- Confirm the changes by highlighting OK, then press Enter.
- To save the changes and exit the BIOS Setup utility, press the F10 key.
What is F2 in startup?
Press “F2” to enter “System Settings” (BIOS) when the DELL icon appears. Restore BIOS to default settings. Restart your computer, press”F2″ to enter BIOS, and press”Alt+F” to restore CMOS.Press “F12” while starting the system to enter a quick startup menu, where you can switch the first boot device.
How do I change my BIOS from legacy to UEFI Dell?
You can resolve this issue by returning the system to the UEFI boot mode.
- From a power off state, power the system on and press F2 to boot into the BIOS setup menu.
- Select “Boot sequence”
- Change the option from “Legacy” to “UEFI”, then select “Apply” in the right lower corner.