How To Remove Paper Tray From Hp Printer?

Contents

How do I remove a printer tray?

If turning the paper wheel does not remove the jammed paper, use the following procedure to remove it:

  1. Hold the grip on tray 2, lift the tray slightly ( ), and then pull it out ( ). Pull tray 2 completely out. Take care not to drop it.
  2. Remove jammed paper.
  3. Push tray 2 gently in until it stops. Printing starts.

How do I take the paper tray off my HP Officejet Pro 8600?

  1. Press the Power button to turn off the printer.
  2. Unplug the power cord from the electrical outlet.
  3. Grasp the underside of the paper tray in Tray 2, and then pull it out from the printer. Figure : Remove the Tray 2 paper tray.
  4. Reinstall the paper tray into the printer. Push the tray forward until it stops to close it.

How do I remove the paper tray from my HP Officejet 6600?

The input tray have a connectors allowing to remove the front part of it, it can be removed by slightly pressing those connectors. Click the Yes button to reply that the response was helpful or to say thanks.

How do I remove the paper tray from my HP Envy 5660?

Remove any jammed paper that is accessible from the output tray.

  1. Push in the output tray extender.
  2. Grasp the output tray, and then pull the output tray towards you to remove it.
  3. Pull out the input tray to its outermost position.
  4. Remove all paper from the input tray.

How do I turn off tray extender?

Gently press on the edge of the extender that is inside the paper tray. The extender should give slightly. It’s now loose. Remove the tool and close the extender.

How do I replace the paper in my printer?

Load Paper in the Paper Tray

  1. Pull the paper tray completely out of the machine.
  2. Press and slide the paper guides to fit the paper.
  3. Fan the stack of paper well.
  4. Load paper in the paper tray with the printing surface face down.
  5. Make sure the paper is below the maximum paper mark ( ).

How do I remove the paper tray from my HP Envy 5540?

Step 1: Clear jammed paper from the printer

  1. Remove any loose paper from the output tray.
  2. Push in the output tray extender.
  3. Grasp the output tray, and then pull the output tray towards you to remove it.
  4. Pull out the input tray to its outermost position.
  5. Remove all paper from the input tray.

How do I do a self clean on my HP printer?

If it is not low on ink, try the cleaning process found in the HP Deskjet Printer Assistant.

  1. Double-click the 3xxx Printer Assistant icon on the Desktop of the computer.
  2. Click Utilities or Tools and Updates.
  3. Click Printer Maintenance.
  4. Click Clean Cartridges.
  5. Follow the on-screen instructions.

How do I clean the rollers on my HP Envy 5660?

Lightly dampen a lint-free cloth with distilled water, and then squeeze any excess liquid from the cloth. Press the cloth against the rollers, and then rotate them upward with your fingers. Apply a moderate amount of pressure to remove any dust or dirt buildup.

Where is the paper tray on a printer?

Paper is housed in the printer’s paper tray, and most trays can be found along the bottom of the printer. There is usually a small notch on the face of the tray that pulls out so you can insert the paper. Within the paper tray, you will notice a guide that can be adjusted to fit your preferred paper length.

How do I remove the paper tray from my HP Envy 7640?

Remove any jammed paper that is accessible from the output tray area.

  1. Remove any loose paper from the output tray.
  2. Push in the output tray extender.
  3. Grasp the output tray, and then pull the output tray towards you to remove it.
  4. Pull out the input tray to its outermost position.
  5. Remove all paper from the input tray.

What is a tray extender?

Your OfficeJet Pro 9025 has an output tray extender. It will slide all the way out and there is a little plastic lip that you can flip upwards so it catches your letter or legal size media.

How do I turn off my HP Envy 6055 printer?

1-3 of 3 Answers

  1. When you find the on/off button on the back on the printer just above the power lead, keep the button depressed for at least 5 seconds.
  2. The power button is located on the back of the HP ENVY 6055 All-In-One Printer.
  3. You don’t per the instructions.

How do I turn off my HP printer?

HP Printers – Cancel a Print Job

  1. For printers with buttons, press the Cancel button .
  2. For printers with a touchscreen, touch X, Stop, or Cancel.

How do I fax from my HP printer without a phone line?

Select the “Fax” setting and enter the number on the receiving end. Press “Start” and the printer feeds and scans the documents and sends them through your wireless network. Your HP printer without a phone line works just fine when it is hooked up to the wireless network.

How do you replace thermal paper?

6 Steps to Install a New Paper Roll:

  1. Turn off the printer and get the roll ready.
  2. Press the “Open” button on the cover of the printer.
  3. Remove the used paper roll and core.
  4. Insert the new paper roll into the slot and pull out some paper.
  5. Close the POS printer cover.
  6. Tear off the paper and turn the printer on.