DIRECTV error message: TV does not support this programs content protection. This error message appears if your HDTV is not responding to our content protection request. You can resolve this error by restarting your HDTV and receiver, and unplugging your equipment.
Contents
Why does my TV say HDMI not supported?
If you are seeing a not supported message on your TV you will need to adjust the resolution ( or image size ) of the source picture i.e. DVD player, Xbox or cable box to fit on your HDTV. You would do that through the settings control of that device. Most common resolutions will be 1920 x 1080 also known as 1080p.
What is program content protection?
It is a type of copy protection that prevents the interception of audio and digital video content when it travels across DVI or HDMI interconnect cables. If the DirecTV message appears, restart your receiver and HDTV. You can do this by turning them off for about a minute and back on again.
How do I fix HDMI not supported?
How can I solve HDMI output problems in Windows 10?
- Check your hardware.
- Make sure that your HDMI device is the Default Device.
- Update your drivers.
- Rollback to the older driver.
- Install drivers in compatibility mode.
- Set your secondary display.
- Run a full system scan.
- Repair your registry.
Why does my Samsung TV says HDMI not supported?
The most common reason for a “PC Mode Not Supported” error message is a resolution conflict. The television may have a lower maximum resolution than the computer, and it cannot display the imagery.Another reason for resolution discrepancies stems from the HDMI external device settings on the television.
How do I make my TV HDCP compliant?
To resolve the issue:
- Make sure that you’re using an HDMI cable.
- Connect your device directly to your TV.
- Try reversing the ends of the HDMI cable.
- Try a new HDMI cable.
- Try another HDMI port on your TV.
- If available, try an HDMI port on another TV.
What are TV component cables?
Component cables use the red and white audio connectors, but they divide the video into three components: one for luma (brightness) and two for color information. This is known as YPbPr component video. Component and composite audio-visual connection cables both transmit video via an analog signal.
What does it mean when your TV says format not supported?
This error occurs when the output device’s resolution is set to something other than what the TV can support. If the output resolution is not set to a compatible setting of the TV, this will be the cause of the error and must be changed to a resolution supported by the television.
Can HDMI ports go bad on TV?
However, when an HDMI cable goes bad, it can bring your entire home theater system to a screeching, or blurry, halt (we actually have another article on this as well).
How do I get my HDMI cable to work on my TV?
Connect one end of a universal HDMI cable into the HDTV Adapter. 2. Connect the other end to the HDMI port on your TV. If your TV has multiple HDMI ports, you may use any of the ports.
How can I check if my HDMI port is working?
How to Tell If My HDMI Port Is Bad?
- Right-click “Computer.” From the context menu that appears, click “Properties.”
- Click “Device Manager.”
- Look at the status of your HDMI port in the dialog box. If the status reads “This device is working properly,” your HDMI port is functioning.
How do I clean my HDMI port?
Turn off the display and video output device. Disconnect the HDMI cable from both the display and the video output device. Inspect the cable ends. Carefully use the tweezers to realign any bent ends, then clean out any dust in the cable ends and HDMI ports on the devices with a lint-free cloth and denatured alcohol.
How do I get my Samsung TV to recognize HDMI?
Samsung TV HDMI ports are not working
- Press the power button on the connected device.
- Select the correct source on your TV.
- Disconnect and reconnect the HDMI cable.
- Try a different HDMI cable.
- Connect a different external device to see if it works.
- Request service for your TV.
How do I reset the HDMI port on my Samsung TV?
Try this Krystal:
- Disconnect all HDMI sources from the inputs.
- Unplug the power from TV/LCD for 10 minutes.
- Plug the TV/LCD back in.
- Connect the HDMI cable one device at a time.
- Turn on the device (ex. PS3).
- Repeat steps 4-5 for each HDMI port.
How do I update Samsung TV?
Using your TV’s remote, navigate to Settings, and select Support. Select Software Update, and then select Update Now. New updates will be downloaded and installed on your TV.
Why does my TV say this screen does not support HDCP?
HDCP enables a signal to be sent between your Sky HD box and TV. This notification may indicate that the signal has failed, or that there’s a problem with the equipment. If your TV has another HDMI socket, disconnect the HDMI cable from the current HDMI input and try another.
How do you fix this display does not support HDCP?
[SOLVED] This display does not support HDCP
- HOW: Turn off your TV and unplug all the devices like your set-top box, audio equipment, etc.
- Fix your TV.
- Update your TV software.
- Update your driver.
- Update your system.
Can I use red white and yellow cables for component?
The AV input you are referring to (yellow, white and red) is composite video (yellow) and stereo audio (red & white). You can use any RCA cable (they’re all the same thing even if they have different coloured heads) to connect composite or component video.
Is component better than HDMI?
The two most desirable connectors for HD video are component and HDMI. Both work well, but of the two, HDMI is the better choice. It’s a single cable for both audio and video hook-up that delivers superior picture quality, surround-sound audio, 3D support, and more, verses multiple cables using component connections.
How do I change the resolution on my TV?
How do I change my TV screen resolution?
- Press MENU on your set-top box remote control.
- Use the RIGHT ARROW button to select SETTINGS on the horizontal menu bar.
- Select SYSTEM OPTIONS, and then scroll to SELECT SCREEN ASPECT RATIO AND HIGH DEFINITION press the OK button.
How do I get rid of invalid format on my TV?
All you need to do is follow these simple steps:
- Select an HD channel on your set-top box.
- On your remote, press CABLE then POWER to turn the box off.
- Select SETTINGS on your remote.
- Ensure the OUTPUT is set to either 720 or 1080.
- Press CABLE then POWER to turn the box back on. Use Set-Top Box.