The bypass tray, also known as the multi-purpose tray or general-purpose tray, is a tray on your copier that can be used to print jobs on media that cannot be run from the main trays of your device. You can typically find this tray on the side of the device, sometimes as an optional pop-out drawer.
Contents
Where is the bypass tray on a printer?
At the printer control panel, press the Home button. Touch Device > Paper Trays. To open the Bypass Tray menu, touch the Bypass Tray icon. It is displayed in the top position, before the numbered trays.
How do I load paper into bypass tray?
Load paper with the print side facing up. Do not force the paper in. If the bypass tray guides are set wider than the paper, move the bypass tray guides in until they correctly fit the width of the paper. If the bypass guides are set too wide, the paper may skew or be creased.
Why won’t my printer print from the bypass tray?
The Tray 5 (Bypass Tray) needs to have the same paper the document selected loaded in it. As well you must select Tray 5 (Bypass Tray) from Printer Properties and also in Page Setup. Ensure Correct Paper is loaded in Tray 5 (Bypass Tray).
How do I print from bypass tray sharp?
Under the “Paper Source” tab, select the drop-down arrow next to “Paper Tray” and select the bypass tray. Then select “OK” at the bottom right of the screen. Now, in the “Print” window, press “OK” and the word document will print from the bypass tray.
Can you print double sided from bypass tray?
You cannot perform 2-sided (duplex) printing on paper fed from the multi bypass tray.If you change from 1-sided to 2-sided (duplex) printing during a copy job, all pages printed after the change will be 2-sided.
How do I disable Toshiba bypass tray?
To exclude the bypass tray from the trays that can be selected when [Auto Select] is selected: In “Setting mode (administrator)”, select [System Settings] → [Printer Settings] → [Default Settings] → [Bypass Tray Settings] → [Exclude Bypass-Tray from Auto Paper Select].
How do I disable bypass tray Xerox?
To disable a tray
- Right click one of the trays in the Paper Trays tab.
- Click Disable Tray from the Tray pull-down menu.
Where is the bypass tray on Xerox printer?
left side
The bypass tray is on the left side of the printer. A tray extension is provided to accommodate larger paper. After loading paper in the bypass tray, ensure that the tray settings on the touch screen match the paper size and type loaded.
How do I select a different tray on my printer?
NOTE: The steps may differ depending on your application.
- From within your application, click File => Print.
- Click Properties.
- Click on the Basic tab.
- In the Paper Source dropdown choose the Tray that you want to print from.
- Click Apply => OK.
- Click OK or PRINT, depending on your application.
How do I print from bypass tray on Mac?
Printing with the Bypass Tray with a Macintosh
- Open the [Setup] settings.
- Select the paper type from the [Setup] settings.
- Make sure [Bypass Tray] is selected from the [Paper Feed] settings.
- Slide the bypass tray guides into position according to the paper size.
Why is my Toshiba Printer not printing?
Check whether the machine’s printer driver has been selected from the print window of the application. If the machine’s printer driver does not appear in the list of available printer drivers, it may not be installed correctly. Remove the printer driver and then install it once again. See also the Software Setup Guide.
How do I print to bypass tray in PDF?
Once you have the paper in the tray, go to your computer and open the document you want to print. Select File… Print (choose your printer)…go to Properties. Under the Basic tab select Paper and set to Bypass tray.
How do I use the Xerox tray 5?
After opening up the Printer Properties, you should see a window similar to the image below.
- Under Paper, click on the down-drop arrow.
- Choose “Select By Tray“.
- Choose “Tray 5 (Bypass)“
How do I select a tray in Word?
To specify a tray within MS Word the user must:
- Click File and then Print.
- In the Print Dialogue click Page Setup.
- In the Page Setup window click on the Paper tab.
- Select the intended tray for the first page and remaining pages.
- Make sure that the same tray is selected in the Driver Properties.
How do I print an envelope sharp?
Operation
- Click the [Paper] tab and select the envelope size from the “Paper Size” menu.
- Select [Bypass Tray] from the “Paper Source” menu of “Paper Selection” Envelopes can be loaded into the bypass tray.
- Select [Envelope] from “Paper Type”
How do I manually print back to back?
Set up a printer to print to both sides of a sheet of paper
- Click the File tab.
- Click Print.
- Under Settings, click Print One Sided, and then click Manually Print on Both Sides. When you print, Word will prompt you to turn over the stack to feed the pages into the printer again.
How do I go back to back Xerox?
About double sided copying
- From the home screen, select Copy.
- Place your item face down on the glass.
- Close the lid.
- Select 2-Sided Copy.
- A green tick will appear against the 2-Sided Copy selection.
- Select Start to scan.
- The photocopier will scan the first side.
Does printer print on top or bottom?
Most of the printers print from the bottom to the top. However, if you have a paper that has already been printed on the front side and you wish to print on the backside of the paper, then you have to place the printed side on the top.
How do I change my printer from bypass tray?
When you return to your computer:
- Select File.
- Select Print.
- Select Printer Properties.
- For Paper Source: select Bypass.
- For Paper Type: leave as plain or select the appropriate type such as Thick 1 for labels, Thick 2 for cardstock, etc.
- Click OK.
- Click Print.
What does Printer Auto Select mean?
The Auto Select (Tray) feature allows print jobs to be directed to the correct paper tray without the customer having to select a Paper Tray Source in the application even though the paper size changes in the print job.