Step 1: Open your web browser and type in the IP address of the router (192.168. 0.1 by default). Step 2: Enter the username (admin) and password (blank by default), and then click OK or Log In.
Contents
How do I login into my router?
In Android, settings menus vary from phone to phone, but once you find the Wi-Fi settings:
- Make sure your phone is connected to your router’s Wi-Fi network.
- Tap on the network name.
- Look for a ‘gateway’, ‘router’ or other entry in the list.
How do you find your router?
On the Command Prompt window, enter “ipconfig” and press the [Enter]. The numbers indicated on the Default Gateway section is your router’s IP Address. If you want to access the router’s web-based setup page, enter the default gateway number in the URL or Address bar of your web browser.
How do I get to my router admin page?
Do this by typing the router’s IP address (in the format http://192.168.1.1) in the browser’s address bar. Enter the administrative login information—username and password—to authenticate and access the admin settings.
How do I log into my 192.168 1.1 IP address?
How to Login 192.168. 1.1?
- Turn on your router and connect it to your computer with an Ethernet cable.
- Open your favorite web browser and type “http://192.168.1.1” into the address bar.
- Enter the correct router login/password combination.
How do I find out what my router password is?
How to See Wi-Fi Password on Android. If you’re running Android 10 or higher, this is easily accessible under Settings > Network & Internet > Wi-Fi. Just select the network in question. (If you aren’t currently connected, you’ll need to tap Saved Networks to see other networks you’ve connected to in the past.)
How do I reset my wifi router?
How to Reset a Router
- Keep your router plugged in.
- Find your router’s reset button. This will be on the back or the bottom of your router.
- Use a paperclip to hold down the reset button for 30 seconds.
- Release the button.
- Wait for the router to power back on.
How do I connect my wireless router to my modem?
Power on your router and computer first and then modem.
- Log into the router’s web-based management page.
- Configure WAN Connection Type.
- Enter your PPPoE username and password which are provided by your ISP.
- Click Save to save your settings, then the router will connect to Internet after a while.
Why can’t I connect to my router admin page?
It’s probably because the router firewall is enabled and prevents the other devices to connect to it. In this case you have to reset the router (by pushing the reset button with a pin or power off then power on after about 15 seconds). When the router comes up, you can access the admin page only for about one minute.
How do I access my PLDT router?
Type 192.168. 1.1 (the most common IP for PLDT routers) in the address bar of your web browser to access the router’s web-based user interface. The default username for your PLDT router is adminpldt. The default password is 1234567890.
What is my IP address for my router?
How to find the IP address of your router using Windows
- Right-click the Windows icon in the bottom-left of your screen, and select “Command Prompt.”
- In the Command Prompt window, type “IPCONFIG” and press Enter.
- Find the “Default Gateway” section. The number listed here is your router’s IP address.
How do I access my router settings without Internet?
How to Access Router Settings Without Internet
- Connect one end of an Ethernet cable.
- Connect the other end of the Ethernet cable.
- Find the router’s IP address.
- Enter the IP address into the web browser.
- Login to the router.
How do I access my router without a password?
Using WPS to Connect Without a Password
- Launch the “Settings” app from the Home screen.
- Navigate to the “Network and internet settings” section.
- Tap on “Wi-Fi.”
- Select “Additional settings.”
- Tap the “Connect by WPS button” option.
- Next, a dialog should open telling you to push the “WPS button” on the router.
How do I access my router admin without password?
If you can’t access the router’s web-based setup page or forgot the router’s password, you may reset the router to its default factory settings. To do this, press and hold the Reset button for 10 seconds. NOTE: Resetting your router to its default factory settings will also reset your router’s password.
Is router password same as WIFI password?
A router password isn’t the same as a Wi-Fi password. The former is the password needed to access the router settings, while a password used for Wi-Fi is what guests need to access the internet from your house.
How do I restore my Internet connection?
Restart your device.
- Restart your device. It might sound simple, but sometimes that’s all it takes to fix a bad connection.
- If restarting doesn’t work, switch between Wi-Fi and mobile data: Open your Settings app and tap Network & internet or Connections.
- Try the troubleshooting steps below.
How do I fix my WiFi problem?
1) Unplug your wireless router and modem from th power source (remove the battery if your modem has a battery backup). 2) Wait for at least 30 seconds. 3) Plug your wireless router and modem back into the power source again (put the battery back to the modem). 4) On your device, reconnect to your WiFi network.
How do I configure my router after resetting?
Click the Administration tab then click on the Factory Defaults sub-tab. Step 3: Under the Factory Defaults section, click on the Restore Factory Defaults button. After resetting the router to its default settings, reconfigure it according to your Internet service.
How do I set up WiFi in my home?
How to Set Up a Home WiFi Network
- Get the right router.
- Connect the router to the modem.
- Connect the computer with Ethernet cable.
- Install router software.
- Open configuration page.
- Enter the internet connection information.
- Secure the router.
- Set the wireless settings.
How do I log into PLDT home WiFi?
Go to 192.168. 1.1 on your web browser and enter the password which is pldthome. Click “Sign In.” You will be disconnected from the network so try to connect again.
How do I know if my PLDT router is working?
The PON light indicator should be steady green if the patch cord is connected properly. If you are connected via WiFi, WLAN 2.4Ghz or 5Ghz light indicator should be steady green or blinking, if there is an ongoing data transmission.