To start, tap on the gear icon in the bottom row of the app to enter Account Settings. Then tap on the name of your system under System Settings. Tap on Sync Module to see the status screen, and tap “Change Wi-Fi Network“.
Contents
How do I reset my Blink to a new Wi-Fi?
From the the Camera Settings screen scroll down to the bottom and tap Change Wi-Fi. In the Change Wi-Fi screen, follow the instruction to “Press and release the reset button on the camera until red and blue lights flash. When ready, the lights will display: Blinking Blue, Steady Green.”
Can you connect Blink cameras to different Wi-Fi?
To add more than ten cameras, or to add cameras at a different location, more than one Sync Module is required. You manage all of your Sync Modules and their attached Blink devices from a single account using the Blink app. Each Sync Module manages one system and the devices connected to it.
How do I get my blink camera back online?
If your camera is in this state, you may need to try the following troubleshooting steps to get that camera back online. Power cycle your camera by removing the batteries for 5 seconds and reinserting them. Wait 30 seconds, then try using that camera again. Move the camera closer to your Sync Module.
Why is my Blink module not connecting to Wi-Fi?
Restart your device, or try switching the Wi-Fi setting off and on again to establish a connection. Make sure your mobile device is within range of your router or access point. Check that your router and any access points are powered on. Restarting your Wi-Fi router may also resolve this issue.
How do I add another Blink module?
Add a Sync Module and create a system
- From the home screen, tap the Add Device + icon.
- The Add Device screen displays your device options.
- The serial number is also printed as a QR code.
- Create a new system by tapping the text entry box and providing a name.
How do I change my Blink Sync module?
How to set up your replacement sync module in an existing system
- To start, tap the “Sync Module” icon and you are sent to the Sync Module details screen.
- Next tap Delete Sync Module.
- To delete a Sync Module, you are required to enter or scan its serial number.
- You are presented with a final popup asking if you are sure.
How do I reprogram my Blink camera?
To reset a Blink camera, reset the Sync Module by holding down the button on the module’s side until its light turns red; this resets the Blink camera system and requires reinstalling the module in the Blink app to use the camera again.
Can you have two different Blink accounts?
With our multi-system support feature, you can access and use two or more (up to 5) separate Blink systems from the same Blink App account. This means if you have the need for all of the above you can have it.
How do I move my Blink camera to another computer?
To change the order, press and drag from the three bars on the camera that you want to move. Place it in your desired location. Once you’re happy with the order of your cameras, your device order will be set. You can now go back to the home screen of your Blink app and see the new order of your cameras.
Why has my blink camera gone offline?
If you receive a “Camera Offline” notification that “Your Blink Mini is offline”, it means the Blink servers no longer have communication with the camera.The first, is to check the Wi-Fi internet and the power supply, then check the camera power connection.
What does it mean when SYNC module is offline?
If you’ve recently made changes to the Wi-Fi network, such as a new router or change of password, tap the Change Wi-Fi button to reconfigure your Sync Module or Mini camera on the new network.
The reset button is located on the right-hand side of the Sync Module next to the USB port. Please note that this could take between 15-30 seconds. This will cause the Sync Module to reboot into setup mode.
Does blink camera connect to WiFi or sync module?
Blink’s original Indoor, XT, and XT2 cameras will only connect to the same Wi-Fi SSID that the Sync Module is connected to. To set up these cameras with an extender, be sure to rename the Wi-Fi extender SSID to be the same the main Wi-Fi network, and use the same password.
How do I enable 2.4 GHz on my router?
Using the Admin Tool
- Connect to your WiFi network.
- Go to Gateway > Connection > Wi-Fi. To change your Channel Selection, select Edit next to the WiFi channel (2.4 or 5 GHz) that you’d like to change, click the radio button for the channel selection field, then select your desired channel number.
- Select Save Settings.
How far can the Blink sync module be from router?
100′
Assuming standard construction techniques (single building, no unusually dense construction materials) the Sync Module should be able to communicate with Blink cameras up to (and perhaps over) 100′ away in any direction. We also recommend keeping the Sync Module near your wireless router for best signal strength.
Can I add a second Blink system to my phone?
To access your Blink system from a second, or new device, all you need to do is download the Blink app from the appropriate app store and log in with your existing Blink app account email and password.
What happens if I delete Sync module on Blink?
Cameras attach to a system through the Sync Module, and the Blink app manages systems. When you delete a system, all of the devices on that system are also deleted. This can be a an easy way to quickly remove items from your account, like when you are selling a device or doing a system reinstall.
How do I reset my mini WIFI camera?
Answer: Pressing the “MODE” button on the mini camera for 10 seconds and it will reboot turning off and on automatically, you just need to wait about 30 seconds and you can find itself signal again in your phone wifi listings.
How do I reset my outdoor blink camera?
Before you try power cycling your blink camera, try power cycling the internet modem. Lets go through the steps to power cycle your internet modem: Unplug your internet modem and Wifi router and from the power source. Wait for a minute or two and then plug the modem back to the power source.
How much does Blink cost per month?
If you’re interested in purchasing a Blink Subscription Plan, you can opt for a Basic Plan at $3.00 per month per device or a year-long subscription at a two-month discount of $30.