When the lights match a blinking blue and solid green pattern, then press Discover Device and you are asked to join the Sync Module Wi-Fi network. Tap Join, and then select your Wi-Fi network from the available choices. Carefully enter your Wi-Fi password and tap Join on your keyboard.
Contents
Why is my Blink not connecting to WIFI?
Restart your device, or try switching the Wi-Fi setting off and on again to establish a connection. Make sure your mobile device is within range of your router or access point. Check that your router and any access points are powered on. Restarting your Wi-Fi router may also resolve this issue.
How do I reset the wifi on my Blink camera?
From the the Camera Settings screen scroll down to the bottom and tap Change Wi-Fi. In the Change Wi-Fi screen, follow the instruction to “Press and release the reset button on the camera until red and blue lights flash. When ready, the lights will display: Blinking Blue, Steady Green.”
How do I get my Blink back online?
If your camera is in this state, you may need to try the following troubleshooting steps to get that camera back online. Power cycle your camera by removing the batteries for 5 seconds and reinserting them. Wait 30 seconds, then try using that camera again. Move the camera closer to your Sync Module.
Why won’t my Blink camera Connect?
If one of your Blink cameras isn’t responding, you may see error messages like “Camera Busy” or “Thumbnail Failed”.Wait two minutes for Internet service to be restored, then try using your camera again. Power cycle your camera. To do this, remove the batteries for 10 seconds and reinsert them.
Does Blink camera connect to Wi-Fi or sync module?
Blink’s original Indoor, XT, and XT2 cameras will only connect to the same Wi-Fi SSID that the Sync Module is connected to. To set up these cameras with an extender, be sure to rename the Wi-Fi extender SSID to be the same the main Wi-Fi network, and use the same password.
How do I sync my Blink?
Upon connection to the Blink app, the Sync Module provides a list of Wi-Fi networks that it can detect. Select the one being used by the Blink app, and enter the password. In the popup that appears, tap Join. *You will be asked to provide a code before running the test.
How do I reconnect my Blink Sync module?
If you are having any issues with your Sync Module, it is best to first power cycle the Sync Module by unplugging the power cord from the back of the unit for 10 seconds and then plug it back in. This should cause the device to reboot and then reconnect within 45 seconds displaying a solid blue and solid green light.
Do Blink cameras work without Wi-Fi?
Blink cameras can’t operate offline and require a 2.4 GHz Wi-Fi Internet connection. One important reason is because cameras use Wi-Fi to send images and notifications. Blink systems minimally require a high speed connection of at least 2 Mbps upload speed.
The reset button is located on the right-hand side of the Sync Module next to the USB port. Please note that this could take between 15-30 seconds. This will cause the Sync Module to reboot into setup mode.
Why is my Blink app not working?
If the Blink app stalls, shows a spinner, or is not responding, you can take the following steps to force it to closed, which should resolve the issue. On iOS Devices: Press the home button twice quickly.When you have located the Blink app, swipe the app preview upward to force the application to close.
What is WiFi mesh?
Mesh WiFi or Whole Home WiFi systems consists of a main router that connects directly to your modem, and a series of satellite modules, or nodes, placed around your house for full WiFi coverage. They are all part of a single wireless network and share the same SSID and password, unlike traditional WiFi routers.
How far can blink camera be from WiFi?
100′
How far away can camera units be placed? Assuming standard construction techniques (single building, no unusually dense construction materials) the Sync Module should be able to communicate with Blink cameras up to (and perhaps over) 100′ away in any direction.
Will Blink cameras work with hotspot?
We do not recommend connecting the Blink system using a cellular hotspot or satellite based internet connection.
What happens if I unplug blink camera?
When the power goes out or your Wi-Fi drops (often for no good reason), your Blink cameras can become disconnected.This reset will allow you to reconfigure your device settings and prompt you to put in new Wi-Fi credentials.
Does Blink use cellular data?
Does the Blink Camera Require Wifi or Cellular Data? The Blink camera requires a Wifi source at all times to be in use.Cellular data may also be used when accessing the app from your cellular device. You can also access the app using a Wifi source if you connect your cellular device to a Wifi network.
What is the Wi-Fi?
Wi-Fi is the wireless technology used to connect computers, tablets, smartphones and other devices to the internet. Wi-Fi is the radio signal sent from a wireless router to a nearby device, which translates the signal into data you can see and use.
Do you have to keep the Blink sync module plugged in?
Answer: Hello! Blink cameras cannot function without an active WiFi connection or an online Sync Module. If internet connectivity is lost or if the Sync Module is powered off, the system will go offline until it both are restored.
What happens if I delete my Blink Sync module?
Cameras attach to a system through the Sync Module, and the Blink app manages systems. When you delete a system, all of the devices on that system are also deleted.When you delete individual devices, remember that the “system” still exists even with no devices attached.