BLUETOOTH® OPERATION (DUAL EARBUDS) Turn each earbud on at the same time by pressing the power button for 7-10 seconds. The two earbuds will begin to pair to each other automatically. When the two earbuds have finished pairing, an audio notification will say “Connected, left channel (earbud), right channel (earbud).
https://www.youtube.com/watch?v=vOx2vjw95oc
Contents
How do I pair my Brookstone Bluetooth headset with my Iphone?
To begin the pairing process, press and hold the POWER BUTTOn at the bottom of the RIgHT EARCUP for 5 seconds or until you see the LED InDICATORS flashing quickly . 3 . Enable the Bluetooth service on your mobile device and search or scan for the “BT-H31” device .
How do I manually connect Bluetooth headphones?
Bluetooth headphones pairing procedure
- Press and hold on the. (power) button for approx.
- The indicator will flash.
- Confirm that the indicator continues to flash after releasing your finger from the button.
- Perform the pairing procedure on the source device to detect your Bluetooth headphones.
Why are my Brookstone headphones not working?
Weak transmitter range or interference from physical obstructions such as a wall may cause your Brookstone wireless TV headphones not to work as expected. When reception over the wireless network is impeded, the sound quality or volume in the headphones may be affected.
How do you put wireless headphones in pairing mode?
Turn on the connecting Bluetooth device and place it within 3 feet (1 meter) of this unit. /POWER button (for the headphones) for more than 7 seconds while the Bluetooth headphones are turned off. When the indicator starts to blink quickly, release the button. The Bluetooth headphones enter Pairing mode.
Why is my Bluetooth not pairing?
For Android phones, go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile & Bluetooth. For iOS and iPadOS device, you’ll have to unpair all of your devices (go to Setting > Bluetooth, select the info icon and and choose Forget This Device for each device) then restart your phone or tablet.
Why is my Bluetooth connected but no sound?
Make sure that the speaker has a BLUETOOTH connection with the BLUETOOTH device. Pair the speaker with the BLUETOOTH device again. The volume of the speaker or BLUETOOTH device may be low.If a cord is connected to the AUDIO IN jack of the speaker or to the BLUETOOTH device, unplug it.
Why does my Bluetooth not work?
Clear the Bluetooth cache and data.
If the Bluetooth is not connecting android properly, you might have to clear the stored app data and cache for the Bluetooth app. Just like every other app on your phone, Bluetooth also stores some data temporarily.After that, reconnect with your Bluetooth device to see if it works.
How do I reset my Brookstone earbuds?
Turn off both earbuds, then turn them both on at the same time by long pressing the Multi-Funciton Button for more than 8 seconds. The LED indicators will flash red and blue, then will flash blue when the earbuds are paired with each other. Pair with your Bluetooth® device.
How do I reset my Brookstone speaker?
1. With Big Blue Party 360 powered on, press and hold the Wi-Fi® SET UP/RESET BUTTON until the LED RING turns off (approximately 5 seconds).
How do you use a blue piston speaker?
The setup was easy:
- Turn the speaker on and press and hold the button with the phone icon.
- Put your phone into pairing mode.
- Find a device called Blue Piston and if it asks for a code, enter 0000,
- Done. Declare victory and have a beer.
Why are my Bluetooth headphones not showing up?
If your Bluetooth devices won’t connect, it’s likely because the devices are out of range, or aren’t in pairing mode. If you’re having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet “forget” the connection.
How do I pair my Bluetooth headset with my phone?
How to Connect Bluetooth Headphones to Android Phone
- First Open Settings.
- Next, tap Connections.
- Then tap Bluetooth.
- Then tap Scan at the top-right corner of your screen.
- Next, press and hold the power button on your headphones.
- Finally, find your headphones and tap them.
How do you connect wireless headphones to your phone?
How to pair Bluetooth headphones with your phone
- Open the Settings app on your phone.
- Tap Connected devices.
- Tap Pair new device.
- Make sure your headphones are in pairing mode (see the owner manual on how to do this).
- Tap the headphones under the list of available devices.
How do you reset Bluetooth headphones?
Unplug the headphones from their charging port. Press and hold the power button for 10 seconds. Wait for the LED light to blink to indicate that you have successfully reset your headphones.
Why is no sound coming from my headphones?
Make sure your audio source is on and the volume is up. If your headphones have a volume button or knob, make sure to turn it up. If you have battery-powered headphones, make sure there is enough charge.Make sure the headphone jack is firmly plugged into the correct audio jack.
How do I connect Brookstone wireless earbuds to my laptop?
BLUETOOTH® OPERATION (DUAL EARBUDS)
Turn each earbud on at the same time by pressing the power button for 7-10 seconds. The two earbuds will begin to pair to each other automatically. When the two earbuds have finished pairing, an audio notification will say “Connected, left channel (earbud), right channel (earbud).
How do you connect cat ear headphones to Bluetooth?
Pairing instructions:
Press and hold the Bluetooth button until the pairing indicator lights up. When the headset is in pairing mode and the device is ready for pairing. After pairing the device for the first time, the headset should automatically pair with the device in the next Bluetooth mode.
How do you pair Big Blue wireless earbuds?
Press and hold the earbud’s Multi-Function Button (MFB)for about 4 seconds, until the LED alternates between red and blue, indicating that the earbuds are in pairing mode. 3. On your device, search the list of available devices and select Big Blue Color Earbuds.
How do I connect my mini wireless speaker?
How to connect Bluetooth speakers to your mobile
- Go to settings.
- Tap the Bluetooth option.
- Turn on Bluetooth.
- A list of available devices will appear.
- If your speaker is not listed, press the button on your speaker that makes it discoverable – it’s often a button with a Bluetooth symbol on it.