How To Open Dell Desktop Case?

Begin to pull the top part of the case upward as you grasp the buttons. The Dell case will swing open on a hinge on the front of the computer. As you begin to lift the case upward, release the buttons. If you continue to depress the buttons as you pull upward, the case will not open.

Contents

How do you take the cover off a Dell desktop?

Use this guide to remove the side panel from the computer and gain access to the internal components.

  1. Step 1 Side Panel. Locate the case cover latch on the back of the computer.
  2. Using your index finger, slide and hold the cover latch down.
  3. Grab the edge of the panel and slide it away from the case until it is removed.

How do you open a Dell XPS desktop?

Procedure

  1. Place the computer in an upright position.
  2. Remove the screw (#6-32xL7-12) that secures the right-side cover release latch to the chassis.
  3. Pull the right-side cover release latch.
  4. Lift the right-side cover and then slide it towards the top of the computer.
  5. Remove the right-side cover from the chassis. Figure 1.

How do you take the cover off a Dell XPS desktop?

Slide the side panel toward the back of the computer. Lift and remove the cover. Set it aside in a safe place with the two thumbscrews.

How do you open a Dell XPS 8940 case?

Steps

  1. Place the computer in an upright position.
  2. Gently pry and release the front-cover tabs from the top-left, working down sequentially to the bottom-left tab.
  3. Swing the front cover outwards, away from the chassis, and remove the cover.

How do you take the cover off a Dell Optiplex?

System Cover Removal

  1. Pre-Removal Instructions Before removing the First Removal:
  2. Establishing image. Pull back the cover latch release. Tilt the system cover from the top outward, and then remove the it from the system. Illustrates the cover removed from the system. Reverse the steps above to replace. Back to Top.

How do I open my computer tower?

How to Open a Desktop Computer Case

  1. Turn the Computer Off. © Edward Shaw/E+/Getty Images.
  2. Unplug the Power Cable. Unplug the Power Cable.
  3. Remove All External Cables and Attachments. Remove All External Cables and Attachments.
  4. Remove the Side Panel Retaining Screws.
  5. Remove the Case Side Panel.

How do I take the back off my computer case?

How to Remove a Computer’s Case

  1. Turn off the computer, monitor, and peripherals.
  2. Unplug your computer from the wall or uninterruptable power supply.
  3. Remove the screws from your PC’s back or outside edges.
  4. Remove the PC’s cover or side panel.

What motherboard is in the Dell XPS 8940?

Intel LGA1200
Dell XPS 8940 DDR4 Intel LGA1200 Desktop Motherboard Part Number KV3RP | eBay.

How do I set up my Dell XPS 8940?

Setup Dell XPS 8940 desktop

  1. Connect the keyboard and mouse to the computer.
  2. Connect the Ethernet cable to the computer, or connect to a wireless network (if applicable).
  3. Connect the monitor using the VGA, DVI, HDMI, or DisplayPort cable provided with the monitor.
  4. Connect the power cable to the computer.

How many hard drives does XPS 8940 support?

Technical Details

Brand ‎Dell
Computer Memory Type ‎DDR SDRAM
Maximum Memory Supported ‎24 GB
Hard Drive Size ‎6000 GB
Hard Disk Description ‎SSD + HDD 7200 rpm

How do you open a Dell Optiplex 7010 case?

Locate the cover latch at the side of the chassis. Pull the cover latch upward. 4. Pull the cover upward to a 45 degree angle and remove it from the system.

  1. Pre-Removal Instructions Before removing the Expansion Card Removal:
  2. Establishing image.
  3. Rotate the release tab on the card-retention latch upward.

How do you open a Dell mini tower case?

  1. Slide the release latch on the back of the chassis until the cover is released.
  2. Slide the release lever towards the bottom of the chassis to release the front panel.
  3. Disconnect all cables from the back of the floppy drive.
  4. Disconnect the hard drive cables.
  5. Reverse the previous steps to replace the memory.

How do I remove the hard drive from a Dell Optiplex 7040?

Steps

  1. Follow the procedure in Before Working Inside Your Computer.
  2. Remove the: cover.
  3. To release the hard drive assembly: Push the retention tabs and remove the power connector [1,2].
  4. To remove the hard drive assembly: Pull the hard drive release handle forward to release the hard drive bracket from the computer [1].

What motherboard does the Dell Optiplex 7040 have?

DELL OPTIPLEX 7040 MINITOWER Intel Socket LGA1151 System Motherboard JCTF8 USA.

Can I open my PC case while it’s on?

Answer from Acterra
“No danger to your health but your computer components might not get sufficient cooling. The case is designed to move air through the front, past the hot components and out the back(generally). Leaving the side off could cause areas within the case to not get enough air to keep them cool.

What is the first step that should be taken when opening a computer case?

What is the very first step that should be taken when performing work with a computer? d. You should power down the system and unplug it. Immediately after you unplug the computer from the power outlet, you’re safe to begin working inside the case.