Put both JBL Free X back into the charging case and take it out. Then, press the buttons on both headphones for more than 5 seconds until the white and blue lights on both earbuds flash alternately. Step 3: Enable your phone Bluetooth and search the “JBL Free X” to connect.
Contents
How do you reset JBL free earbuds?
How to Reset JBL Free X?
- Step 1: Unpair the JBL Free X with your phone.
- Step 2: Put both of the JBL Free X earbuds back into the charging case.
- Step 3: Take the Right earbud out of the charging case and long-press it for 10s.
- Step 3: After that, your JBL Free X has finished reset.
Why won’t my JBL earbuds connect to Bluetooth?
The most common reason for one of your JBL earbuds to not be working is due to pairing issues, simply disconnecting your earbuds from your Bluetooth device and resetting your JBL earbuds should, in most cases, fix the issue. In other cases cleaning your charging pins located in the case should solve the issue.
Why won’t my JBL free connect?
If both earbuds can’t be connected automatically:
Put both JBL Free X back into the charging case and take it out. Then, press the buttons on both headphones for more than 5 seconds until the white and blue lights on both earbuds flash alternately.
How do I reset my JBL earbuds?
To reset your JBL headphones, hold down on the volume buttons for five seconds until you hear the factory reset ping. As for your JBL earphones, hold down on the power button for five seconds until the LED lights turn off.
Press the “Bluetooth” button located along the bottom of the right ear cover. You’ll hear the following sound. That sound indicates that your JBL Live wireless headphones are in pairing mode. Additionally, the blue power light on the back of the right ear cover will start blinking.
How do you pair JBL right and left earbuds?
Step 1: Pairing left and right JBL TUNE 220TWS earbuds: take it out from the battery box and press the left and right ears three times at the same time, then, you can automatically complete the pairing of these two earbuds.
Why is my Bluetooth not pairing?
For Android phones, go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile & Bluetooth. For iOS and iPadOS device, you’ll have to unpair all of your devices (go to Setting > Bluetooth, select the info icon and and choose Forget This Device for each device) then restart your phone or tablet.
Why is my Bluetooth pairing rejected?
Why Bluetooth pairings fail
Bluetooth depends on both hardware and software to work properly. So if your devices can’t speak a common Bluetooth language, they won’t be able to connect.Bluetooth Smart devices are not backward compatible and won’t recognize (or pair with) older devices that support Classic Bluetooth.
How do you put wireless headphones in pairing mode?
Activate Pairing mode on the Bluetooth headphones. Press and hold the Power button or the ID SET button, as shown in the illustration below. When the indicator starts to blink quickly, release the button. The blinking means the Bluetooth headphones have entered Pairing mode.
How do I fix rejected pairing?
Step 1: Check Bluetooth basics
- Turn Bluetooth off and then on again. Learn how to turn Bluetooth on and off.
- Confirm that your devices are paired and connected. Learn how to pair and connect via Bluetooth.
- Restart your devices. Learn how to restart your Pixel phone or Nexus device.
Why won’t my earbuds connect?
On Android, tap the Settings cog next to a paired device and choose Unpair (or Forget, as it’s labeled on some phones). Recharge the battery.Try plugging them in and charging them fully before pairing, even if they say they have some battery left. Make sure both devices are compatible.
Why isn’t my device pairing?
If your Bluetooth devices won’t connect, it’s likely because the devices are out of range, or aren’t in pairing mode. If you’re having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet “forget” the connection.