How To Reset My Dlink Router?

How do I reset my router to factory default settings?

1. Step 1: With the router on, insert the end of a paper clip into the pinhole highlighted below.
2. Step 2: Hold the paper clip down for 10 seconds and release.
3. Step 3: The unit will reboot automatically. Once the WLAN light stops blinking, the unit has been reset.
4. Note:

How do I reset my D-Link wireless router?

Power OFF the device. Press and hold the ‘reset’ button; while doing so, power on the device again and keep holding the ‘reset’ button for another 10 seconds. Then release the button and wait until device restarts.

How do I reset my D-Link router username and password?

Locate the “Reset” button on the D-Link router. The Reset button is in a tiny hole adjacent to the WAN or Internet port on most D-Link models. Insert the paperclip into the Reset hole to press the button. Press and hold the Reset button for 10 to 15 seconds.

Why is my D-Link router not connecting to the Internet?

Please check your cabling (in step 1 above). If the cabling is correct, try using a different Ethernet cable. Do not proceed further until this states Connected. – Network Status- When the internet is connected/working, this should be Connected.

What happens when I reset my Dlink router?

Resetting your router will clear all your home networking settings and will change all of your settings back to the defaults. Ensure that the router is ON.

Will resetting my router mess up my Internet?

Well, yes, if you reset your router (modem), you will temporarily lose internet connection. Once it’s back up, you can reconfigure your router modem (to your appropriate settings), then everything should be back to normal.

What is admin password for Dlink?

Step 1: Open your web browser and enter http://dlinkrouter or http://dlinkrouter.local or http://192.168.0.1 into the address bar. The default username is Admin and the password is blank (nothing). Click Login. Step 4: Scroll down the page to “Wireless Security Mode”.

How do I find my router username and password without resetting Dlink?

The Forgotten Wi-Fi Password

1. Type your router’s IP address —192.168.
2. At the login screen, select “Admin” from the drop down menu and enter your admin password.
3. Once you access the Web configuration screen, click “Setup” in the top menu.
4. Select the “Wireless Settings” link on the left-hand side.

What is D-Link WIFI default password?

What are the default user name and password for my D-Link DI-624 router? The default user name for the D-Link DI-624 wireless router is “admin,” and the Password field should be left blank.

How do I setup my Dlink router to the Internet?

Setting up a D-Link Router

1. Open the router in a new browser tab. Open your browser and navigate to http://192.168.0.1, the default IP address of the D-Link router.
2. Enter the D-Link router password.
3. Setup a strong password.
4. Select your Timezone.
5. Configure your internet connection.

How do I connect my DLink router to the Internet?

1. Step 1: Connect the included power adapter to a wall socket and your router.
2. Step 2: Connect the Ethernet cable to the WAN (or internet) port of both your modem and router, connecting the two. (
3. Step 3: Give it a moment to start up with a light indication.
4. Step 4: Head to your computer or mobile device.

What do the lights on my D-Link router mean?

The flashing Status light on the front of your D-Link router indicates that it is operational. Itdoes not show whether the router has been configured or not, so itmay still be necessary to set up Internet or wirelessconnectivity.2) Run through the factory reset procedure for your router.

Does Resetting router change WiFi password?

NOTE: Resetting your router to its default factory settings will also reset your router’s password. The router’s default password is “admin” as for the username, just leave the field blank. IMPORTANT: Make sure that the Power LED of the router is blinking when you press the Reset button.

How long does a Dlink router take to reset?

Please allow for up to 1 minute for the reset process to complete. Note: Do not hold the reset button for longer than 10 seconds, doing so could cause the router to go into a recovery mode (The Power light will flash or stay orange).

How often should you reboot your router?

Most companies recommend rebooting your router at least every couple of months. If you’re ever wondering whether or not you could benefit from a router reboot, just go ahead and do it. There aren’t any negative results from rebooting your router, and it provides quite a few positive benefits.

How do I reset my Dlink router password?

How do I change my D-Link Router’s password?

1. Step 1: Open your Internet browser and enter.
2. Step 2: Enter the password for your Admin account in the field provided.
3. Step 3: Locate the Wireless Settings from the drop down menus.
4. Step 4: In the Password field, specify the new wireless password for the desired wireless band.

How do I access my router admin page?

Step 1: Open your web browser and type in the IP address of the router (192.168. 0.1 by default). Step 2: Enter the username (admin) and password (blank by default), and then click OK or Log In.

What is the default IP of Dlink router?

192.168.0.1
Step 1: Open your web browser and enter the IP address of the router into the address bar (not in google). The default IP is 192.168. 0.1, or using the link: http://dlinkrouter.local.

How do I know if my Dlink router is working?

Usually it’s http://192.168.0.1 or http://192.168.1.1).PressEnter.

1. Type the username and password in the login page, the default username and password are both admin.
2. Select the diagnostic tool: Ping.
3. Type the IP Address/Domain name of the PC/server you want to ping the IP Address/ Domain Name.
4. Click Start to diagnose.

What is D-Link Setup Wizard?

Wireless Network Setup Wizard
This wizard is designed to assist you in your wireless network setup. It will guide you through step-by-step instructions on how to set up your wireless network and how to make it secure.