Troubleshoot your AT&T service
- Restart your TV receiver by holding the POWER button down for 10 seconds then pressing it again to restart. This process takes 5-8 minutes and will impact any DVR recordings in progress.
- Restart your Wi-Fi® Gateway by removing the power cord for one minute then plugging it back in.
Contents
How do I reset my AT&T cable box?
Restart your gateway or modem manually
- Unplug the power cord from the back of your gateway or modem.
- Wait 20 seconds.
- Put the internal battery back in, if you have one.
- Plug the power cord back in.
- Wait up to 10 minutes for the gateway or modem to restart and your Broadband light to turn solid green.
Look for the factory reset button on your AT&T U-Verse device. The reset button is usually red in color and located on the back of the device.
Why does my AT&T TV say no signal?
If your TV is displaying just “No Signal”, that means the the TV is not seeing a signal on the selected input. It could be that someone has changed the selected input on your TV to an input where nothing is attached.
How do I reset my receiver?
Unplug your receiver
- Unplug your receiver’s power cord from the electrical outlet, wait 15 seconds, and plug it back in.
- Press the Power button on the front panel of your receiver. Wait for your receiver to reboot.
Why is my U-verse box blinking?
If the lights on your U-verse receiver are blinking and no TV picture is displayed, your receiver is having trouble coming online. Unplug your receiver and wait five minutes, plug it back in, and then restart. If you see three dots on your screen, it means your system is connecting.
What is the blue light on the ATT U-verse box?
The blue light indicates that the Receiver is configured to transmit to the TV in HD mode.
How do I fix my AT&T service?
Visit the Troubleshoot & Resolve Tool
You may need to sign in to your myAT&T account. Visit att.com/devicetroubleshoot. If the device you’re troubleshooting isn’t presented, select Change and choose the correct device. Select a Service-Related or Device-Related Issue from the list.
What does restarting your gateway do?
A factory reset restores your Gateway to its original default settings, including your WiFi name and password.If prompted, you’ll be required to create a custom WiFi name and password and reconnect devices to your home network using this information.
How do you reset AT&T bgw210?
Reset your gateway
- Press and hold the Reset button on the gateway for at least 10 seconds. If you let go before 10 seconds, the gateway will reboot, but it won’t reset.
- Wait until the gateway restarts and all the status lights are lit.
- See if the Broadband or Service status lights are solid green.
Wi-Fi Protected Setup (WPS) provides a fast, easy way to connect your WPS-enabled devices to your hotspot Wi-Fi network without having to manually enter the password. To utilize the WPS features on your device, press and hold the WPS key.
How do I fix HDMI no signal?
If you want to connect your Android phone or tablet to the TV, make sure the HDMI connection setting is enabled on your device. To do it, go to Settings > Display Entries > HDMI connection. If the HDMI connection setting is disabled, enable it.
Why does my TV say no signal when HDMI is plugged in?
Verify that the source device has power and is turned on. If the source device is connected with an HDMI® cable: Make sure the TV and source device are both turned on, then disconnect the HDMI cable from one of the devices and then connect it again.Try a new or another known working HDMI cable.
What does no signal mean?
“No Signal” is a message coming from your display device (not from your computer), indicating it has nothing to display.The reason for the confusion is that the message doesn’t come from your computer — it comes from the computer’s display. And on top of all that, it might or might not indicate there’s a problem.
On the left side of your receiver is a power button. Press and hold the power button for ten seconds then release, your receiver will reset. Some receiver models have a door, press on it and it will fall down, behind this is a power button in the top left corner and reset button in the bottom left corner.
How do I factory reset my Sony receiver?
Reverting to the factory default settings
- Turn off the receiver.
- Hold down (on/standby) on the receiver for 5 seconds. [CLEARING] appears on the display panel for a while, then changes to [CLEARED *].
Locate the Reset button on the rear of the gateway, located beside the power input. Press and hold the button for 3 – 4 seconds. Note: Do not press the Reset button for more than nine seconds.
How do I reset my AT&T modem remotely?
Remotely reboot my router
- Open a web browser on a connected device and type 192.168. 1.254 in the search bar.
- Login by using the administrator login information on the side of your Gateway.
- Depending on your model, there should be an option to “Restart your System” in the home page.
Why is my AT&T modem not working?
Try replacing the power cord first. A blinking or flashing Power light means that the modem isn’t getting consistent power. A flashing red DSL or Sync light means your device couldn’t synchronize. Make sure your modem is connected to the phone line and all DSL filters are installed.
Why is my ATT TV box blinking red?
If it’s red and blinking, it’s not. Check your internet or Wi-Fi® connection and test your signal strength using your remote: Press the Home button, then Settings > Help > Troubleshooting > Run Network Diagnostics. Try using an Ethernet cable to connect to your DIRECTV STREAM device instead of Wi-Fi.
Why is my ATT box blinking green?
However, no matter which brand you are using, the green blinking light on your AT&T router usually indicates that the router is trying to establish broadband connection i.e. to connect to the ISP network.