Contents
How do I set up my LaView camera?
Go to Main Menu>Camera>Camera. Tap the green “+” icon on an empty channel and enter in the IP address for your camera. In the password section, enter the “Verification Code” that is on the label of your camera. Tap “Ok” and give the LaView NVR 30 seconds to connect to your camera.
How do I connect my LaView camera to my phone?
LaView Mobile P2P Set Up
- Click on the “+ Device” option.
- Go to DVR, Main Menu>Configuration>Network>P2P then scan QR code or manually enter Device ID and password.
- Press the “Save” button to be taken to the device list.
- Select Device and select cameras. Press “Play” for Android or “Live” for iPhone to start live view.
Why won’t my LaView camera connect?
Make sure your phone is connected to the correct Wi-Fi network. Make sure the camera is connected to a power outlet. Confirm the status on the camera’s LED light. Try to reset the camera by holding down the reset button for 10 seconds, while plugged into power; the light will turn a solid red when resetting.
How do I reset my LaView WIFI camera?
Hold down the button, with the power still disconnected. While still holding the button down, plug power into the camera and continue to hold the button for 30 seconds. After 30 seconds from the power being plugged in, release the reset button and the camera should reboot and be set back to factory defaults.
What is LaView IP camera activation password?
We strongly recommend that you change the default Admin password ‘12345‘ for better security protection.
How do I watch my LaView camera online?
Log in using the same credentials as you would directly on the system. After you’re logged in, click the link to download and install the plug in. Restart the browser and click the “Start All Live View” button at the bottom, and it should bring up your camera streams.
Where can I find my LaView verification code?
Enter the verification code found in Main Menu>Maintenance>System Info and it will be the “Verification Code” – If you cannot find it within the menu, the verification code should be on the label of your DVR. Located either on the bottom or side.
What does red light mean on LaView camera?
When camera LED light flashes in Red, it means the network or microSD card status is abnormal. If you can see Live camera feed in the App, the network should be normal, and you may need to re-configure the microSD card.Reset camera if needed.
What is private mode on LaView camera?
Privacy mode will disable the camera’s live feed, this can be useful if there will be a lot of motion in the camera’s field of view the camera that you do not wish to record e.g. mowing the lawn, washing the car etc. When enabled the live feed will not load and will show a grey or striped image instead.
How do I reset my LaView password?
I forgot the password for my system, how do I reset it?
- Take a picture/screenshot, email serial number along with the date and time to [email protected].
- Once we receive the serial number and time, we will reply with a Secure Code. The system will default the password back to 12345 or prompt you to setup a new password.
How do I change my LaView password?
Please email us at [email protected] to reset the password for this system. In the email please mention you need a password reset along with the model number and date that displays on the main view of the system. A technician will reply with some instructions and a temporary password for your system.
What is event recording on LaView camera?
“Events” are special features that certain cameras have, an example would be “Line Crossing” or “Face Detection”. If you have a camera that supports any special features, you can set them up within the VCA section of the NVR. In the Record Schedule section, this option will only record when such “Events” are triggered.
Why do my LaView cameras keep going offline?
Troubleshooting: This can be caused by several things. First you can try changing the max bitrate down on each camera, if the cameras are trying to use too much bandwidth then it can knock cameras offline.If that does not work, then it may be either a bad camera or cable.
What does a blue light mean on a camera?
A flashing blue light on a security camera means you are ready for the WiFi protected setup.
Why is my blink camera blinking red?
In Summary. The Blink Outdoor Camera may be sending you signals that something needs to be fixed by flashing different colors. If you see your camera flashing red, that can mean one of two things: either your device is not connected to the internet, or your battery is running low.
Why is LaView app not working?
If you are still having issues, make sure DDNS is NOT enabled(unchecked).Go to Extranet Access, Platform Access or DDNS and make sure LaView P2P is selected then apply, also make sure “Enable Stream Encryption” is disabled. 4. If none of these work, then it could be a network issue.