Contents
How do I turn my Bluetooth speaker on?
Go to settings in your phone (both Android and iOS) and select the Bluetooth settings option. Scroll down to the other devices section under Bluetooth settings. Make sure your phone is in discoverable mode as well. Under ‘other devices’ select the speaker you want to pair and click on it.
How do I turn off my Brookstone speaker?
To power off, press the POWER BUTTON. Note: Big Blue Party 360 will go into low power mode immediately if no audio is streaming in Wi-Fi, Aux or Bluetooth® mode. After 60 minutes of no audio streaming in Wi-Fi, Aux or Bluetooth® mode, Big Blue Party 360 will automatically turn off.
How do you pair a Brookstone floating speaker?
Press and hold the POWER BUTTON until the power on tone sounds. The speaker will automatically enter pairing mode and the PAIRING LED will flash. 3. Select “Brookstone Floating” on your device.
How do you pair a swivel speaker?
Once the speaker is in pairing mode and your device is ready to pair, select “Swivel Speaker”. If prompted, use 0000 as a PIN for the pairing code. Once the speaker is selected, it will play two tones to confirm pairing is complete.
How do I fix my Bluetooth speaker not working?
What you can do about Bluetooth pairing failures
- Make sure Bluetooth is turned on.
- Determine which pairing process your device employs.
- Turn on discoverable mode.
- Make sure the two devices are in close enough proximity to one another.
- Power the devices off and back on.
- Remove old Bluetooth connections.
How do I reset my Bluetooth speaker?
Factory reset clears all custom settings, presets, Wi-Fi settings, and Bluetooth pairings from your speaker.
- Press and hold the VOLUME and SOURCE knobs at the same time for 7 seconds until both the SOLO and MULTI indicators are lit.
- Your speaker will reset to its factory state after about 1 minute.
Why won’t my phone connect to my Bluetooth speaker?
If your Bluetooth devices won’t connect, it’s likely because the devices are out of range, or aren’t in pairing mode. If you’re having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet “forget” the connection.
How do you charge a Brookstone speaker?
With the speaker’s Power Switch off, plug the other end of the USB Cable into a USB Port on your computer. 3. The LED Indicator will illuminate red while charging, and the light will go out when the speaker is fully charged. Charges in approximately 2.5 hours for up to 11 hours of listening enjoyment.
How do you remove the battery from a big blue party speaker?
- Step 1 Battery description. The battery used in these speakers is 11.1V 4400 mAh Lithium Ion 3S2P 18650 battery pack.
- Step 2 Tools.
- Step 3 Remove screw covers.
- Step 4 Remove 8 screws from the bottom cover.
- Step 5 Remove old battery.
- Step 6 Optional – Big Blue 360 Update.
- Step 7 Install new battery.
- Step 8 Install the cover.
How do I turn up my big blue speaker?
A blue light blinks and you hear a series of beeps to let you know it’s working and then you can select the speaker from your device. That’s it. You control the volume with touch-sensitive buttons on the top of the unit and can adjust bass and treble via two knobs on the back of the speaker.
How do you pair Brookstone earbuds?
With the earbuds powered off, press and hold the Multi-Function Button of one earbud until the LED Indicator quick flashes blue and red alternately, indicating that the earbud is in pairing mode. Optionally, turn on the second earbud; its LED Indicator will flash blue when it is paired with the main earbud.
How do I connect my blue speaker?
What to Know
- Put your Bluetooth device in pairing mode by pressing and holding the Power button or Pairing button.
- iPhone: Go to Settings > Bluetooth > Other devices. Tap the device to connect.
- Android: Go to Settings > Connected devices > Bluetooth. Select Pair new device and then tap the speaker’s name.
Why is my Bluetooth not turning on?
Power cycle
If your cell phone started to suddenly have Bluetooth issues unexpectedly and out of the blue then try simply powering your Android cell phone off, wait a minute (30-60 seconds), and then power the phone back on. Then try to establish a connection again and see if this simple trick helped to fix it.
What do you do if your Bluetooth won’t turn on?
- Restart your device and check else, you can troubleshoot with the below-mentioned steps.
- Remove all the Bluetooth connection. Go to the Settings menu of your device.
- Delete Bluetooth cache.
- Use safe mode to identify misbehaving apps.
What do you do if your Bluetooth wont turn on?
2.3 Clear the Bluetooth cache
- On your phone, navigate Settings > Application Manager, and you’ll see all the apps and services on your phone.
- Select the Storage option.
- Tap the Clear Cache option.
- Go back of the Menu and restart your phone.
- Now turn your Bluetooth feature on and turn connecting it to your preferred device.
Why won’t my Ultimate Ears turn on?
If your UE Boom portable speaker is refusing to turn on, see the UE Boom Won’t Turn On problem page for possible problems and solutions. Press and hold down both the volume button and the power button for about 10 seconds until you hear a sound. After that the device should turn off. Try turning it on after that.
Why is my Bluetooth speaker blinking?
The blinking blue light means that the speaker is connected to a Bluetooth device. If it’s not connected to the one you are using check others that are in the area and make sure it did not connect to those.
Why is my Bluetooth speaker not charging?
If your Bluetooth speaker stops charging, there are two things involved; software issues or hardware issues. Software issues involve software bugs while hardware issues include an under-voltage lithium-ion battery, a bad micro USB cable, and a broken solder joint on the USB charging socket.
Why won’t my speaker work on my phone?
Restart the Device. One of the common methods to fix it when your Android speakers are not working is to reboot your device. If there are apps or other utilities causing interference with your phone’s speakers, turning your phone off and then back on should fix most of those issues.
How do I force a Bluetooth device to pair?
Go to settings, Bluetooth, and find your speaker (There should be a list of Bluetooth devices that you last connected to). Tap on the Bluetooth speaker to connect, then turn the speaker on AFTER you pressed the connect button, while your device is trying to connect to it.