Plug in the modem and press the power button to turn it on, if needed. Wait at least 60 seconds and then plug in the router. Press the power button to turn it on, if needed. Wait at least 2 minutes before testing or using the devices.
Contents
How do I turn on my wifi router?
But if you want a general walk-through of setting up your home network, these steps should get you fully connected.
- Check Your Internet Connection.
- Place the Router.
- Connect to Power.
- Connect to Your Internet Source.
- Access the Router’s Web Interface.
- Connect Wired Devices.
- Connect Your PC or Device to Wi-Fi.
Many modems and routers have a power button and a reset button. The reset button is usually a pin hole located in the back of the device and requires a paperclip to reach. It is not recommended to enact the reset method as it could potentially reset your device to factory settings and wipe the existing configuration.
How do I turn on my router after unplugging?
Reset Your Modem and Router (Power Cycle)
Leave the devices unplugged for 30 seconds, then plug the modem back in followed by the router. Give them both time to boot up and connect by watching the activity lights (usually 1 to 5 minutes). Then try connecting to the Internet again on your computer or connected device.
Why is my router offline?
If your network is offline:
Check your modem’s Internet connection.You can check if your modem is connected to the Internet by connecting a device to the modem and seeing if you can still access the Internet . 3. Restart the router to make sure it isn’t causing the issue.
Why is my router WiFi not working?
Rebooting your router and modem is one of the first things you should do when your WiFi isn’t working. To reboot these devices, unplug the power cord from the back of each device and wait for at least 30 seconds before plugging them back in. After waiting 30 seconds, plug your modem in first.
How do I access my router dashboard?
Find Your Router’s IP Address
You log into your router’s firmware through a browser. Any browser will do. At the address field, type the IP address of your router. Most routers use an address of 192.168.1.1.
On most routers, the WPS button is on the back of the router, alongside the Ethernet ports. Press it once, and WPS is enabled and working. You can then connect your wireless devices through WPS.
Wi-Fi Protected Setup (WPS) is a feature supplied with many routers. It is designed to make the process of connecting to a secure wireless network from a computer or other device easier. NOTE: Some manufactures may use the following terms instead of WPS (Push Button) to describe this function.
How do I restart my modem?
How to reboot your modem:
- Shut down your device (computer, tablet, phone, etc.).
- Unplug the power cord from the modem and your router.
- Wait 1 minute, then plug the power cord back into the modem and then the router.
- Wait for the Internet light to turn green.
- Turn your device back on.
- Try connecting to the Internet.
Does unplugging a router reset it?
When you turn something off and back on, you reboot it, whether it’s a phone, computer or router. For a router to be successfully rebooted, it must be completely disconnected from its power source, whether it’s coming from the wall, and internal battery or both.
Do you turn on modem or router first?
First, unplug your router and broadband modem from power (for some devices you’ll have to remove the battery as well). Then wait about 30 seconds, and plug them back in: first the modem, then the router. Wait a few minutes for them to completely power back on.
How do I fix my modem it wont turn on?
How to Fix a Modem That Won’t Connect to the Internet
- Check the lights on your modem.
- Check the power supply and coax cables.
- Reboot your router and modem.
- Check your Ethernet cables.
- Disconnect all connected devices.
- Plug your computer into your modem.
- Keep your modem cool.
- Update your modem and router’s firmware.
How do you restart your router?
How to Reset a Router
- Keep your router plugged in.
- Find your router’s reset button. This will be on the back or the bottom of your router.
- Use a paperclip to hold down the reset button for 30 seconds.
- Release the button.
- Wait for the router to power back on.
How do I get my network back online?
Unplug the modem and router and leave them unplugged for a minute or so. Then plug them back in and see if they’re able to reconnect. The modem and router are like the heart and lungs of your home internet network, and simply unplugging them gives the equipment a chance to clean memory banks and restart tasks.
How do I reconnect to the internet?
Step 1: Check settings & restart
- Make sure Wi-Fi is on. Then turn it off and on again to reconnect. Learn how to connect to Wi-Fi networks.
- Make sure Airplane mode is off. Then turn it on and off again to reconnect.
- Press your phone’s power button for a few seconds. Then, on your screen, tap Restart .
Is my router dead?
Your router may be dying if it randomly loses power or if it does not power on at all. This usually indicates a failing power supply. If the router does not power on, be sure to check the electrical outlet to see if other devices receive power to determine if the problem lies with the router or the electrical outlet.
What is my IP address for my router?
If you have Wifi Analyzer installed on your Android smartphone, launch the app. You will see the channel graph tab immediately. Swipe to the Access Points tab and you will see the IP address of your router.
How do I log into my 192.168 1.1 IP address?
How to Login 192.168. 1.1?
- Turn on your router and connect it to your computer with an Ethernet cable.
- Open your favorite web browser and type “http://192.168.1.1” into the address bar.
- Enter the correct router login/password combination.
Why can’t I connect to my router admin page?
It’s probably because the router firewall is enabled and prevents the other devices to connect to it. In this case you have to reset the router (by pushing the reset button with a pin or power off then power on after about 15 seconds). When the router comes up, you can access the admin page only for about one minute.
How do I connect my wifi to WPS?
How to Connect to Wi-Fi Using the WPS Push Button?
- Check if your wireless router features WPS push button.
- On the phone, go to [Settings] > [Wi-Fi] and turn it on.
- Tap [Advanced Settings] > [WPS Button Connection].
- Press the WPS connection button on your router to establish a connection.