Every now and again you may get a blank, blue or black screen on your Samsung TV whilst using BINGE.Test the HDMI cord by following these steps on your TV: Go to Settings > Support > Self Diagnosis > Signal Information > HDMI Cable Test > Start Test. If the HDMI cord is faulty, you may need to get a new one.
Contents
How do I fix the blue screen on my Samsung TV?
Confirm the TV is set to the same source as the external device.
- For instance, if your cable box is connected to HDMI 1, set the TV source to HDMI 1.
- If the TV is set to the correct source, but there is still no image, unplug and reconnect the AV connections one cable at a time, from both ends of each cable.
What causes a blue screen on Samsung TV?
The issue where the TV displays a blue screen with no picture most commonly occurs with older systems where you’re TV is connected to a set-top box or a VCR using a coaxial cable and it’s required to set your TV to channel 3 or 4 to receive the signal.
What causes blue screen on TV?
1. Whenever you get a blue screen on any TV, make sure your the video source to your TV (cable/satellite box, streaming device, or antenna) is on and your cables are connected securely. You would be surprised at how often cables get jostled by a pet, kid or something else, and become loose.
What is blue screening?
A blue screen occurs when Windows encounters a “STOP Error.” This critical failure causes Windows to crash and stop working. The only thing Windows can do at that point is restart the PC.
How do I reset my Samsung TV?
Open Settings, and then select General. Select Reset, enter your PIN (0000 is the default), and then select Reset. To complete the reset, select OK. Your TV will restart automatically.
How do I fix the picture on my Samsung TV?
Press the Menu button on your remote. Select Picture. Select Screen Adjustment. From here you can adjust aspect ratio, screen fit, and screen position.
How do I factory reset my Samsung TV without picture?
Also try this one:
- Make sure that your TV is OFF.
- Take your Smart Remote and simultaneously press Info + Menu + Mute + Power.
- Next, enter the following sequence into your remote: Mute > 1 > 8 > 2 > Power.
- Your television will boot up in service mode. Using your remote, go to Options > Factory Reset.
How do I fix the blue screen on my Hisense TV?
- Power Cycle Your Hisense TV. This is a quick and easy solution to fix the TV with no picture.
- Check All the Connection Cables. The reason for the blue TV screen is loose connections.
- Check the Streaming Devices.
- Check the Wifi Signal Strength.
- Reset Your Hisense TV to Factory Settings.
- Test the Backlight.
- Hardware Fixes.
Why is my LG TV screen blue?
LG TV Blue Tint on Screen
This problem is found especially on LG LED TVs released before 2019. If you are having a blueish purple tint on your LG TV as shown below, it means it has a faulty backlight LED array.The only solution to fix the blue tint problem on your TV is to get the backlight LED array replaced.
Is a blue screen bad?
When Windows senses that something could cause real harm, it stops everything, resulting in the infamous Blue Screen of Death.A BSoD can be a symptom of a hardware problem. In that case, it might look as if the error itself caused the problem. Although a BSoD won’t damage your hardware, it can ruin your day.
Is the blue screen of death a virus?
Blue screen of death (BSOD)
If your PC crashes regularly, it’s usually either a technical problem with your system or a malware infection. You might not have installed the latest drivers for your device or the programs you’re running could possibly be incompatible with your hardware.
How do you fix a blue screen?
How to fix a Blue Screen of Death on a Windows PC
- Uninstall incompatible software.
- Run a memory checker.
- Check for hard drive errors.
- Remove non-essential peripherals.
- Replace defective or incompatible expansion cards.
- Run SetupDiag after a failed Windows update.
- Perform a clean install.
Hold down the “Exit” button for 12 seconds if you want to point the remote control at the TV.The TV can be reset with the “enter” button on the remote control. The unit will stop operating.
How do I reboot my Smart TV?
Reset the TV with the remote control
- Point the remote control to the illumination LED or status LED and press and hold the POWER button of the remote control for about 5 seconds, or until a message Power off appears.
- The TV should restart automatically.
- TV reset operation is complete.
How do I reset my Samsung TV without a remote?
How do I reset my Samsung TV if it turned off and I don’t have a remote for it? Turn the TV off at the power point. Then, hold start button on the back of the TV or under the front panel for 15 seconds. Lastly, turn TV on at the power point.
How do I reset the color on my Samsung TV?
If you’d like to start fresh with your picture settings, you can just reset them. Using your remote, navigate to and select Settings > Picture > Expert Settings > Reset Picture, and then select Yes to confirm.
How do I know if my smart TV is going bad?
6 Signs That Your TV Needs to be Repaired
- Dead Pixels. Few things are as off-putting as a dead pixel in the middle of your screen.
- Colour Distortion. If the colours on your screen appear distorted, then your TV might be malfunctioning.
- Bars and Lines.
- Image Retention.
- Fuzzy Screen.
- Fading Screens.
What is wrong with my Samsung TV screen?
Cable connection problem: Your Samsung Smart TV is likely to have a black screen issue due to the cable connection problem. Loose connections, damaged cables or inactive power sources are the probable cause of the problem on your TV.If the menu appears on the screen of your TV, then the problem is with the sources.
Why is my Samsung TV screen GREY?
When the “picture size” menu is greyed out on your TV it implies that the cable being used with the content being displayed does not allow for the option you desire. The “picture size” menu usually gives you the ability to select the “wide fit” and “screen fit” display options.
How long does a Samsung TV last?
A Samsung TV can last around 4 to 7 years with constant use, at the highest brightness, and being almost always on. If taken care of properly, it can last much longer.